subject: Digital outside advertising Side Wall Mount [print this page] Digital outside advertising Side Wall Mount
When any dynamic signage equipment is fitted, no matter if it is indoors or outdoor electronic signage every now and then you have to mount over an almost inviable void, let us guide you through this.
Some times in an deployment the roof is too high and the floor is too far down such as in a shopping mall, over the escalators with the demand to mount the screen at a height the only option to be had is to mount the unit from a side wall.
The only challenge here is that the weakest link is the mounting between the wall and the mount, so getting this right is paramount. As these mounts fasten to the wall using anchor bolts in the mounting plate and this has a heavy duty re-enforced arm that is positioned in the right position and locked into situ then the display is added.
Electronic outdoor advertising installation.
The same practice is employed for out-of-doors dynamic marketing, but the anchor bolts are more often than not more sizable as the total weight of the hardware in an LCD monitor enclosures can be up to a massive 180lbs, in turn the bracket is produced from heavy gauge steel providing a solution that is robust and will endure the elements.
Usually for out-of-doors deployment the mounting units come in 2 elements, the first is bolted to the wall then the other is bolted to the rear of the LCD enclosure using out of the ordinary anti theft fasteners, then both sections are matched up and attached delivering a solution that is durable to theft as well as the weather.
There are copious varieties of mount from floor mounts, ceiling brackets, flat wall brackets, angled wall brackets and cantilevered wall mounts, giving the audio visual installer total control over the set up process.
Many of the mounts present cable raceways were the power and feed cables can be fed to make the installation look complete without any cables hanging loose.
