subject: An Introduction To Fuel Injection Cleaning [print this page] An Introduction To Fuel Injection Cleaning
It is important to know the procedure for cleaning the fuel injector since the fuel deposits can harm the tip of the fuel injector and the efficiency would drastically come down. The main reason why these deposits form is because when a thoroughly heated engine is shut off, your water pump no longer circulates coolant.
This is when the fuel injector's temperature rises tremendously and the end part of the fuel injector is heated up and attracts fuel deposits. Certain steps need to be adhered to, so that your fuel injector is maintained well without having to worry about the mass of fuel which gets stuck to your fuel injector.
Cleaners - By adding a cleaner directly to your vehicle's fuel tank, you will be able to clean off the grunge that has built up on your fuel injector, however this is the least effective method of fuel injection cleaning.
Many of the oil companies are well aware of the grave repercussions, the fuel injector would suffer and hence additives are produced which helps in keeping these injectors in good working condition.
The disadvantages of additives is that it adds to the already bad condition of the intake valve and hence it is imperative that you maintain your intake valves well and free from harmful deposits.
It is advised that you go in for fuels which are branded so that your fuel injector remains neat and free from harmful deposits.
You certainly get what you pay for in this situation, as brand name fuels always have additives anyways which will easily prevent deposits from forming on your injector.
If you want to ensure that your vehicle remains in good working condition and running smoothly, you need to get it serviced and oiled every 25000 miles, so that there is no excessive strain on the motor vehicle.
Types of fuel injectors - Up until recently, most injector models were contributing immensely to the problem in the first place.
Lessen the burden of these injector cleanings by changing the model from the pintle to the seat, disc or ball design. The disc design for your injector will be less prone to deposit formation in the first place, but that does not mean that deposits will never be formed afterward. Replacement of the fuel injector would help in cleaning the build up if the normal cleaning does not work out.
