subject: The Best Way to Ride the Brand New Razor Sole Skate Skateboard [print this page] The Best Way to Ride the Brand New Razor Sole Skate Skateboard
The Best Way to Ride the Brand New Razor Sole Skate SkateboardSimply following these very simple tips will help you use your sole skate with ease.
Step one : Ways to get familiar with your sole skate
Before you can ride the new sole skate, become acquainted with it.
First of all the two ends are very different from one another. It is possible to think that the solitary wheel is the front of the skateboard, in reality it's the back. The front of the sole skate is the two wheeled end. The rear of the sole skate is the single wheel.
There is a raised black button in the deck near the rear of the sole skate and it performs as the roll restrictor.The roll restrictor prevents the skateboard from rolling away from the skater whenever he steps off of the skateboard. As long as the rider is on the skateboard and the button is pressed, the skateboard readily moves. The moment the button is released,, the brakes are applied to the rear wheel that halts the skateboard.
The elevated platform over the centered rear wheel is the back foot rest. When you have pushed off on your skate board, your foot is placed here. This also creates far better stability on your sole skate.
Step two: Foot placement
Set your sole skate on a level spot without any gravel as well as debris. Position one foot on the deck of the sole skate with the two wheeled end to the front. Similar to a skateboard you thrust off with the other foot after which you can rest your foot on the back platform which is covering the centered rear wheel. Try using first your right foot and then your left foot on the deck to find out foot placement is much more suitable in your case.
There are three elements you have to take into account using your foot placement.
1. Just by setting the ball of your foot over the steering axle of the front wheels, you are going to have improved steering control of your sole skate.
2. The heel of your foot must be able to push down on the black roll restrictor button located on the back of the deck to release the stopping mechanism.
3. With regard to balance, you need to align your foot along the center of the Sole Skate. This will likely balance your weight which will help prevent tipping the skate to either side.
Locate the center placement of the sole skate simply by stepping on the deck of the sole skate and transfer your weight to the sole skate until it feels stable and does not tip to either side.
When you have acquired your sweet spot on the deck of your sole skate and feel comfortable, then you're ready to ride.
Step three: How to get started as well as gain speed on your sole skate
Getting started and getting speed is not hard when you've found the balance position on your sole skate. Simply position your front foot on the deck of the sole skate and propel off with the back foot as you would with a skate board. Continue pushing off with the free foot until you have built up speed, and you'll be able to rest your foot on the back foot rest to coast.
Step four: Carving (turning)
After you have perfected moving in a staight line with your sole skate, carving will be only a matter of leaning your weight. With you knees somewhat bent and your rear foot resting on the rear foot rest for additional stability, simply lean into the direction you intend to turn. Stay in this position until you are going in the correct direction and then straighten up.
Step five: Stopping your Sole Skate
Stopping your sole skate is simple. Just step off. The roll restrictor button will be released and the brake system is activated stopping your sole skate from going too far away from you.
The sole skate can seem complicated at first, but by means of these easy basics, you will soon be cruising around town on your new sole skate.
