subject: Precisely What Is Reverse Cycle Technology? [print this page] Precisely What Is Reverse Cycle Technology?
Reverse cycle is the latest in heat pump technology that converts a high effectiveness heat pump system right into a hydronic heat pump which will generate hot water for warming a home or workplace without back up warmth down to zero.
Now you can use a total electric technique that will out perform any kind of fossil fuel methods and provide the ultimate convenience of radiant floor home heating, forced air and/or ductless fan coils.
With reverse cycle technology, you're no longer limited to common or ground origin heat pumps. That's why reverse cycle technology is a smart choice that provides the flexibility and operation required by demanding household applications. Depending on the settings, a reverse cycle system may supply water as little as 44 f for summertime air conditioning and up to 120 f for winter season heating. Because the fluid supply is taken in a piped circuit, you should use forced-air or high-pressure central air systems or ductless fan coils for hvac as well as employ the particular unmatched comfort regarding in-floor radiant heat.
The reverse cycle technologies will produce around 120 f hot water regarding forced air and/or under floor heating plus 44 farreneheit chilled water pertaining to air conditioning, providing comprehensive comfort with a single efficient unit. The particular modular design with the system allows a number of units to be piped collectively to achieve essentially just about any size load. This allows true staging and also redundancy which is not found which has a standard heat pump. The reverse cycle is ideal for house or offices via 500 to 55,000 square feet and can cost a fraction of an standard heat pump to operate.
For installment simplicity, the reverse cycle method provides heating and cooling in a single system. It is developed as an air-source heat pump utilizing two insulated water lines to deliver water in the closed loop regarding hydronic heating and perfectly chilled water air conditioning. Reverse cycle technological innovation is built with a high quality heat pump and is available these days without a heat pump enabling you to provide the heat pump that you pick. The system takes benefit of air to water to air warmth transfer to deliver fantastic performance at temps of 10 f and lower.
Site preparation is a lot simpler too. In contrast to ground source temperature pumps, reverse cycle technology does not require digging a new geothermal well for usage as a heat source. Rather, a tank is used with regard to capacity control to shield the system during times regarding low output and through defrost cycling and to avoid the unit from short-cycling within summer. An advantage of reverse cycle systems is it can use up to 10% less kw/hour over a geothermal heat pump.
The reverse cycle's ability to match up required heating lots is the main reason with regard to such savings. Additional heat pumps has to be sized to the air conditioning load. Consequently, convenience of heating fall short by half, demanding supplemental electronic heating elements. Even so, the reverse cycle technology could be sized to the temperature load with back-up home heating only for emergencies. Additionally, it's modular style makes it possible to use a number of modules for setting up, redundancy and load balancing for facilities from 1,500 to 30,000 sq ft.
