subject: Login page WRTP54G with linksys [print this page] Login page WRTP54G with linksys Login page WRTP54G with linksys
have a reliance broadband internet connection. When I connect the cable directly to my laptop and browse internet the first page I open will go to reliancebroadband.co.in for authentication and once authenticated the subsequent internet access will work fine
However when I connect the internet cable RJ45 to the internet port of the Linksys WRTP54G wireless router and connect the LAN cable from router to laptop I don't get the login page.
have a reliance broadband internet connection. When I connect the cable directly to my laptop and browse internet the first page I open will go to reliancebroadband.co.in for authentication and once authenticated the subsequent internet access will work fine
However when I connect the internet cable RJ45 to the internet port of the Linksys WRTP54G wireless router and connect the LAN cable from router to laptop I don't get the login page.
The only setting I have changed on the router side is as follows:-
Under Setup >>> MAC Address Clone >>> Enable >>> Click "Clone your PC's MAC"
Can someone please assist me on how to get this working,.Connect the ethernet cable from your PC to one of the 4 LAN ports of the router.
2.Then connect your cable of DSL modem's Ethernet cable to the Router's Internet port.
3.
Confirm you have Installation CD.
4.
Give details of the ADSL MODEM supplied by Reliance.
.
login page WRTP54G with linksys
5
For wifi mode in Reliance landline based broadband connection.
see this thread.
http://www.indiabroadband.net/relian...ter-guide.html (Reliance Wired Broadband - Wifi with ADSL modem+router guide)have a reliance broadband internet connection. When I connect the cable directly to my laptop and browse internet the first page I open will go to reliancebroadband.co.in for authentication and once authenticated the subsequent internet access will work fine
login page WRTP54G with linksys
However when I connect the internet cable RJ45 to the internet port of the Linksys WRTP54G wireless router and connect the LAN cable from router to laptop I don't get the login page.
The only setting I have changed on the router side is as follows:-
Under Setup >>> MAC Address Clone >>> Enable >>> Click "Clone your PC's MAC"
Can someone please assist me on how to get this working,.Connect the ethernet cable from your PC to one of the 4 LAN ports of the router.
2.Then connect your cable of DSL modem's Ethernet cable to the Router's Internet port.
3.
Confirm you have Installation CD.
4.
Give details of the ADSL MODEM supplied by Reliance.
.
login page WRTP54G with linksys
5
For wifi mode in Reliance landline based broadband connection.
see this thread.
http://www.indiabroadband.net/relian...ter-guide.html (Reliance Wired Broadband - Wifi with ADSL modem+router guide)
__________________
WA3002-G4 QUICK GUIDE : => 18 modems 45,180+27,400 hits,Connect the ethernet cable from your PC to one of the 4 LAN ports of the router. -- Done
2.Then connect your cable of DSL modem's Ethernet cable to the Router's Internet port. -- Done
3.Confirm you have Installation CD. -- I dont have the installation CD. Where do I get it from.
4.Give details of the ADSL MODEM supplied by Reliance. -- I dont have the modem at my end. I just have the cable at my end.
I have a reliance broadband internet connection. I dont have the modem at my end. I just have the cable at my end.
When I connect the cable directly to my laptop and browse internet the first page I open will go to reliancebroadband.co.in for authentication and once authenticated the subsequent internet access will work fine
However when I connect the internet cable RJ45 to the internet port of the Linksys WRTP54G wireless router and connect the LAN cable from router to laptop I don't get the login page.
Steps performed:-
1.Connect the ethernet cable from your PC to one of the 4 LAN ports of the router.
2.Then connect your cable of DSL modem's Ethernet cable to the Router's Internet port. -- Done
3.Under Setup >>> MAC Address Clone >>> Enable >>> Click "Clone your PC's MAC"
I tried all the settings but still I am NOT getting the reliancebroadband.co.in home page when I am connected via the router.
I am able to ping the router from my laptop but not the router's gateway
I am able to ping my laptop from my router
__________________
WA3002-G4 QUICK GUIDE : => 18 modems 45,180+27,400 hits,Connect the ethernet cable from your PC to one of the 4 LAN ports of the router. -- Done
2.Then connect your cable of DSL modem's Ethernet cable to the Router's Internet port. -- Done
3.Confirm you have Installation CD. -- I dont have the installation CD. Where do I get it from.
4.Give details of the ADSL MODEM supplied by Reliance. -- I dont have the modem at my end. I just have the cable at my end.
I have a reliance broadband internet connection. I dont have the modem at my end. I just have the cable at my end.
When I connect the cable directly to my laptop and browse internet the first page I open will go to reliancebroadband.co.in for authentication and once authenticated the subsequent internet access will work fine
However when I connect the internet cable RJ45 to the internet port of the Linksys WRTP54G wireless router and connect the LAN cable from router to laptop I don't get the login page.
Steps performed:-
1.Connect the ethernet cable from your PC to one of the 4 LAN ports of the router.
2.Then connect your cable of DSL modem's Ethernet cable to the Router's Internet port. -- Done
3.Under Setup >>> MAC Address Clone >>> Enable >>> Click "Clone your PC's MAC"
I tried all the settings but still I am NOT getting the reliancebroadband.co.in home page when I am connected via the router.
I am able to ping the router from my laptop but not the router's gateway
I am able to ping my laptop from my router
The only setting I have changed on the router side is as follows:-
Under Setup >>> MAC Address Clone >>> Enable >>> Click "Clone your PC's MAC"
Can someone please assist me on how to get this working,.Connect the ethernet cable from your PC to one of the 4 LAN ports of the router.
2.Then connect your cable of DSL modem's Ethernet cable to the Router's Internet port.
3.
Confirm you have Installation CD.
4.
Give details of the ADSL MODEM supplied by Reliance.
.
5
For wifi mode in Reliance landline based broadband connection.
see this thread.
http://www.indiabroadband.net/relian...ter-guide.html (Reliance Wired Broadband - Wifi with ADSL modem+router guide)
__________________
WA3002-G4 QUICK GUIDE : => 18 modems 45,180+27,400 hits,Connect the ethernet cable from your PC to one of the 4 LAN ports of the router. -- Done
2.Then connect your cable of DSL modem's Ethernet cable to the Router's Internet port. -- Done
3.Confirm you have Installation CD. -- I dont have the installation CD. Where do I get it from.
4.Give details of the ADSL MODEM supplied by Reliance. -- I dont have the modem at my end. I just have the cable at my end.
I have a reliance broadband internet connection. I dont have the modem at my end. I just have the cable at my end.
When I connect the cable directly to my laptop and browse internet the first page I open will go to reliancebroadband.co.in for authentication and once authenticated the subsequent internet access will work fine
However when I connect the internet cable RJ45 to the internet port of the Linksys WRTP54G wireless router and connect the LAN cable from router to laptop I don't get the login page.
Steps performed:-
1.Connect the ethernet cable from your PC to one of the 4 LAN ports of the router.
2.Then connect your cable of DSL modem's Ethernet cable to the Router's Internet port. -- Done
3.Under Setup >>> MAC Address Clone >>> Enable >>> Click "Clone your PC's MAC"
I tried all the settings but still I am NOT getting the reliancebroadband.co.in home page when I am connected via the router.
I am able to ping the router from my laptop but not the router's gateway
