subject: All right: the installation of vehicle electrical and electronic problems - Car, Electronics - Automotive Electronics Industry-hc360 HC Network [print this page] All right: the installation of vehicle electrical and electronic problems - Car, Electronics - Automotive Electronics Industry-hc360 HC Network
With the development of science and technology, novel, modified vehicles, the city has been in our lives has been favored by people. Not only from the exterior, interior and features the lives of people gave a lot of convenience and fun. In this primary and we talk about the vehicle electrical modification.
Vehicle electrical additions or alterations are divided into several cases. One is the original vehicle to install the optional equipment, such as remote door unlock, car telephone, DVD, CD, power amplifiers, car computer, fax, refrigerator, exterior lighting and trailer boxes, etc., to meet the different needs of different customers . Therefore, these optional equipment, the original vehicle will be reserved in corresponding parts of the vehicle a good plug or socket. If you do not set aside the plug or socket, can be purchased through authorized factory service center and the appropriate use of electrical wiring, installation by a professional service person can. For those using electrical appliances, electrical OEMs during the whole car has been taken into account when designing these with electrical power to the vehicle load, while the conversion process is also relevant for the conversion for reference. As long as the process was modified according to OEMs on it.
Another is to install special equipment or vehicles not covered by the original design of the use of electrical appliances, such as alarms, lights, vehicle exterior dome light, alarm system, large power amplifier, TV, charger. In the installation of such equipment, consider the installation of the entire vehicle with electric power and load, such as to consider the engine start, the normal ignition ignition system, the normal fuel injection fuel injection systems and other electrical appliances at the same time when work generator power output, battery capacity requirements. There should also be modified to ensure strict quality conversion process: the different currents, the transmission of signals of different wire types and models used are different. For example, if the transmission is the pulse signal, in order to ensure the accuracy and timeliness of the signal, the type and length of the wire has a specific requirement. Circuit layout is also very worthy of study, taking on board existing installation of electrical appliances with electrical and electromagnetic interference among each other impact.
Also, consider the case of emergency, such as vehicle collision vehicle fire will lead to serious incidents threatening the safety of the crew. For some high-end cars, with power management system, when the installation of electrical appliances, the installation of the use of electrical power management system must be within the scope of control, one power management system to achieve the desired functions. Finally, after this type of use of electrical installation, should carry out various tests, such as functional testing, leakage testing, full vehicle load testing to ensure the normal use.
Above all a brief introduction to a number of vehicles converted to use some simple electrical knowledge, real car will be converted to your colorful, fashion and technology to lead the pace!
