subject: Do not force the screen above the LCD screen lid [print this page] Do not force the screen above the LCD screen lid
Keyboard (Keyboard)
* Accumulation of dust, use a small brush to clean the cracks, or use the camera lens is usually in high-pressure jet cleaning tank, blowing the dust, or use a handheld vacuum cleaner to remove dust and debris on the keyboard.Acer AC Adapters compaq AC Adapters
* Clean the surface can be coated with a soft cloth with a little cleaner, in the case of gently wipe off the keyboard surface.
Hard drive (HardDisk)
* As far as possible in a stable condition, to avoid shaking the place in an easily operate the computer.
* Switch process is most vulnerable when the hard disk. At this point the hard disk speed bearings has not yet stable, if vibration, can easily cause a bad track. It is suggested that, after waiting for about ten seconds or so off and then move the laptop.
* Once per month and re-scan the disk to improve disk access efficiency.
* Avoid using bad or moldy appearance of the diskette.
* Purchase floppy clean sheets, clean the read-write head regularly.
CD-ROM (CD-ROM)
* Use the disc cleaning tablets, regular cleaning of the laser read head.
* Please hands and land into the disc drive, a hand CD tray, the other hand the film is indeed fixed CD, CD tray to avoid distortion.
Touchpad (Touchpad)
* Please be sure to use the touch pad to keep hands clean, run around to avoid the phenomenon of the cursor.toshiba Tecra A8 adapter Acer TravelMate 600 AC Adapter
* Accidentally soiled surface, can be wet, dry cloth gently wipe the corner of the touch panel surface can be, do not use rough cloth and other items clean surface.
* Touch-sensitive plate is precision electronic components, do not use sharp objects to write on the touch panel, nor the weight to use, so as to avoid damage.
* Clean the surface can be coated with a soft cloth with a little cleaner, in the case of gently wipe off the keyboard surface.
Hard drive (HardDisk)
* As far as possible in a stable condition, to avoid shaking the place in an easily operate the computer.
* Switch process is most vulnerable when the hard disk. At this point the hard disk speed bearings has not yet stable, if vibration, can easily cause a bad track. It is suggested that, after waiting for about ten seconds or so off and then move the laptop.
* Once per month and re-scan the disk to improve disk access efficiency.
* Avoid using bad or moldy appearance of the diskette.
* Purchase floppy clean sheets, clean the read-write head regularly.
CD-ROM (CD-ROM)
* Use the disc cleaning tablets, regular cleaning of the laser read head.
* Please hands and land into the disc drive, a hand CD tray, the other hand the film is indeed fixed CD, CD tray to avoid distortion.
Touchpad (Touchpad)
* Please be sure to use the touch pad to keep hands clean, run around to avoid the phenomenon of the cursor.toshiba Tecra A8 adapter Acer TravelMate 600 AC Adapter
* Accidentally soiled surface, can be wet, dry cloth gently wipe the corner of the touch panel surface can be, do not use rough cloth and other items clean surface.
* Touch-sensitive plate is precision electronic components, do not use sharp objects to write on the touch panel, nor the weight to use, so as to avoid damage.
