subject: The Right Characteristics Of A Good Foundation Waterproofing Membrane [print this page] The Right Characteristics Of A Good Foundation Waterproofing Membrane
For every construction, having a proper foundation waterproofing membrane is more a requirement than anything else for its basement. It is important, of course, to secure the building that is being constructed to protect it from any accidents, calamities, or any misfortune. In Europe, the commonly used parts is the 650 waterproofing membrane, which has climbed to popularity over time. This waterproofing membrane for a foundation has a 56 mil layer of polymerized asphalt formula which shelters the wall whenever it cracks. The material usually has the ability to stretch along the cracks and therefore makes sure that the waterproof is guaranteed. There are other membranes available in the market from different manufacturers but the 650 waterproofing membrane already has a good track record that can be relied on for different usage. So this is suitable for any new construction, rehabilitation of old decks, foundation walls and waterproofing membranes and so on and so forth.
This foundation waterproofing membrane system has been used since time immemorial. With continuous development for a strong system for waterproofing, the benefits that it brings to the customer are also increasing as time goes by. Companies specializing in this foundation waterproofing will definitely enjoy economies of scale and more competitors will certainly try to break the record. A backing layer of high strength, puncture resistant polyethylene films are just some of the characteristics of a good waterproofing membrane for the foundation. A foundation wall will definitely last for long with these features locked in, with your money capitalizing on a good investment. They must have about one third less on seams and overlaps for high level capability for waterproofing.
This is only, however, determined by a certain type of waterproofing material. So if you are going out to buy a foundation waterproofing membrane, be sure to inquire about this. Specially designed membrane for the waterproofing of a foundation is also required, such as polguard liquid membrane 8.5, if the surfaces are rough. As this contains urethane waterproofing in it, the solution is applied on the old surface. The products for this purpose come with a booklet to guide you through the entire process.
