subject: Expert teach you how to calibrate laptop battery [print this page] Expert teach you how to calibrate laptop battery
Welcome to a laptop battery specialist of the Acer Laptop Battery First post by: www.batterystores.ca Many of my friends usually ask me some questions about laptop battery, I always says that it is just a necessary laptop accessories. Try our best to protect it, but there is no need to deliberate care.It is not worth of wasting too much time on protecting our laptop battery such as Acer BTP-43D1 Battery. When the machine can not work but the battery is well,how to deal with the battery. So I says use carefully but not to deliberate care.How to calibrate the battery? This question is very important! Why?, because of the instability of battery in useing and charging will cause the battery capacity decline, this decline is not due to aging, so the rightly calibrated can make this part of the loss of the capacity recoveryed.Therefore, the battery calibration on a regular basis is very necessary thing, do it every two months.If your laptop is Compaq or IBM Thinkpad,it is easy to do it.You just use the BIOS or program which provides a battery calibration features and according to the prompts. For others who have not this feature can follow my steps: 1. Set the screen saver to "None" 2. In the Windows Power Management, set the power scheme to "always open", and set all menu which is related to the closure of all equipment of the following to "never" 3. In the alert tab, set "power's insufficient warning" to 10%, the operation is set to "do nothing"; set "a serious power shortage alert," to 3%, operating to "standby" 4. The screen brightness set to the maximum 5. Confirmed that all the windows is closed, and save all the data from previous work 6. Confirmed that battery charge over 80%,then unplug the power and all external devices, if the screen automatically reduces brightness, please set it to the brightest That's all! you can go to sleep or do somethings but don't want to use your laptop, after the the discharge notebook will automatically shut down,then plug the power to recharge laptop.Pay attention to, wait for some hours before it is fully charged and then boot.Finally recover your settings about the power. Why should we do this?The aim is to make laptop battery discharge with small continuous current, which status is unlikely to be achieved in our daily use, as we will carry out all kinds of operations inevitably in the normal state which will make the electricity up and down. The machine of IBM Thinkpad can detect the battery capacity after the change, other machines can download a program called batterymon to see, you will find the capacity of battery is restoring. By the way if your laptop battery has been aginged because of excessive using, you should not to do it as it can not take help to you. I suggested that who buy the new laptop do it for two or three times following the method before the lithium battery is used.If you according the context to do,I think the you will have the maximum performance of the battery. http://www.articlesbase.com/laptops-articles/expert-teach-you-how-to-calibrate-laptop-battery-4535152.html
