subject: Making a Surround for a Wood Burning Stove [print this page] Making a Surround for a Wood Burning Stove
A surround for your wooden burning stove has a functional objective as it protects non-combustible surfaces from the warmth of the fire. On the other hand, it also serves a ornamental objective, with a assortment of ready-to-fit surrounds accessible in a range of designs.
A fireplace is usually comprised of the hearth, the surround and the mantel piece although some wood burning stoves are fitted straight into the chimney recess, with no need for a surround. In this instance the stove itself delivers a decorative function to the space, but a hearth is however important for fire safety reasons. With fire recesses, there are also Creating Laws relating to the surrounding walls.
Developing Regulations
In accordance with developing rules a hearth should be fitted to guard non-combustible resources from the heat of the stove and from any accidental spillages of ash. The hearth itself should be created from a non-combustible material, this kind of as concrete or masonry.
There are set pointers as to the dimensions of hearths the two for wooden burning stoves fitted into a recess and for freestanding stoves. With recesses the hearth really should attain at minimum 150mm past the sides of the stove and 300mm in front, and with freestanding stoves the hearth really should be at least 840mm x 840mm in dimension. The hearth ought to also be at least 125mm thick with a space of 50mm among the hearth and any combustible materials, or or else 250mm thick.
Surrounds need to also be manufactured from non-combustible components, and if the stove is fitted into a chimney recess there are set demands pertaining to the thickness of the walls and the supplies that they are built from. For instance, the walls of masonry chimneys really should be at minimum 100mm thick, but if the walls separate the place from yet another compartment or dwelling, then they really should be a minimum of 200mm absent from the interior surface of the flue liner or have a gap of 40mm from the outer surface of the chimney.
The fireside recess and the chimney should also be built from non-combustible materials, and the internal walls need to be a minimum of 200mm in thickness. Flue measurements should also comply with Building Regulations for security factors.
Any work undertaken ought to be notified to your neighborhood organizing department so that they can make confident that all the specifications are staying met. Alternatively, you need to utilize a certified installer who will be acquainted with Developing Rules.
If you acquire all set-created hearths and surrounds from a specialist stove supplier, they will typically make sure that these pieces meet with Developing Laws. It is greatest to examine with the supplier to make sure even though. For more info about "woodburning stoves", you need to go to: woodburning stoves
Planning
To fit a fire surround you will need to commence by marking the walls according to the measurements of the surround so that you can make positive it suits. Masking tape is useful for this undertaking. Subsequent, you require to mark in which the studs are in the wall as the spacers will be fixed to these. The studs are the upright posts that sort element of the framework of the wall. You will also require some non-combustible spacers, and screws to repair the spacers to the wall studs.
Supplies
Ideal supplies for wood burning stove surrounds are cement board, slate, or granite tiles. For motives of safety, wooden surrounds are not ideal. Nonetheless, delivering all Constructing Rules have been complied with in terms of thickness and components relating to the chimney walls, then it is achievable to have a wooden mantel shelf. Several suppliers sell mantel shelves total with fittings in a variety of woods and finishes. Once again, the mantel shelf really should be a ideal distance from the stove and flue.
With some fire surrounds the mantle spot forms portion of the surround as it juts out from the wall. Consequently, you will not need to have to acquire a individual mantel shelf for these types of fire surrounds.
Fitting the Surround
Commence by repairing the spacers into the studs working with screws. The purpose of the spacers is so that there will be an insulating gap in between the wall and the confront of the surround. You can then resolve the fireplace surround, which ought to be manufactured from a non-combustible materials. You do this by utilizing screws that are prolonged adequate to match by means of the spacers and then into the wall studs. There need to be a gap at the top and bottom so that air can warmth up and circulation by way of the gap.
After you have fitted the surround, if it is not provided with a decorative complete, you can enhance it using a fire proof materials these kinds of as stucco, tiles or warmth-resistant paint. Keep in mind to cover any surrounding areas to safeguard them from spillages.
Fire surrounds arrive in a extensive variety of types to complement any area in a selection of supplies. You can pick from modern or classic. Whatever style of surround you select, it is sure to boost the look of your wooden burning stove creating it a wonderful focal level for any environment.
