subject: How to fix water damage in basement - and protect your home from various risks [print this page] How to fix water damage in basement - and protect your home from various risks
How to fix water damage in basement is probably one of the biggest kinds of repairs that you have to do. The thing with the basement is that it is deep within the ground. When water begins to sit in the basement, it can immediately cause a lot of problems like the formation of mold and mildew. Since it is deep into the ground, there are more considerations as to where the damage might come from.
First, there is the plumbing issue. Next, it could be a problem with the sump pumps. The walls can also bear leaks from the earth outside. Improper window installation as well as poor grading can also cause water to enter the basement, causing water damage. The biggest trouble for basements is when a flood strikes. It is necessary for homeowners to always check their basements for damage since the conditions on this area are more favorable to mold and mildew formation. It is critical that the issue is addressed in the most efficient way possible.
Step 1
The most important step on how to fix water damage in basement is to detect the sources of where the water is leaking from. The leaks can be from one source only or it could also be caused by several sources. It is necessary that you turn off the gas line of appliance where the ignitor has been submerged on water. If it is a broken water pipe, you need to turn off the water supply to stop water from further spilling on the surface. If the water comes in from the windows or if it is seeping through the walls, you might need specialized tools for those. If the water is from the sewers or from floods, ask the help from experts since these are big projects.
Step 2
Take away as much water as possible on the basement. Since it is below, you might need to have a strategic way to remove the water efficiently without causing much damage to the other parts of your house. Once the water has been removed, you will need to take away the soaked furniture inside the basement. If you have carpeting, remove it as well as the insulation. If water is still present, use a wet vac to eliminate all water on the basement surface.
Step 3
The basement surface is still wet at this point and to address this issue, you will have to use a wet vac to address the problem; you might need specialized tools like air blowers. These are large fans that are placed on the water damaged area. Direct the air to the surface and let it dry. In some cases, moisture can also remain. That is why a dehumidifier is a critical tool on how to fix water damage in basement, adjust it to the right settings so that the humidity levels do not allow the growth of mold and mildew that could cause allergies to those who live in the house.
Step 4
All furniture that has been soaked on water should have been disinfected. Unusable carpets should be replaced as well as the insulation pads.
Knowing how to fix water damage in basement is critical in ensuring that the structure of the home and its underlying foundations are kept safe, secure and solid. Any homeowner needs to act fast and effectively to ensure that the water damage will not cause any more risks to the home and the health of the family. If the case is severe, it would be best to get an expert to handle the task effectively.
You can find more about How To Fix Water Damage In Basementon our website.
Copyright 2011 water-damage-guide.com, all rights reserved.
