subject: How To Fix The Hotplug DLL Error On Your Computer [print this page] How To Fix The Hotplug DLL Error On Your Computer
First of all the Hotplug file is what's known as a Dynamic Link Library and it's purpose is to act as an instruction to the computer so it tells it what to do under certain conditions allowing the computer to carry out certain tasks. The Hotplug file however is used to enable hotswitchable hardware such as PCMCIA devices and other USB devices to be safely removed from your computer, without the need to restart the computer every time. This hotplug file is standard and is used by Windows and other and most device drivers out there to enable the hotplugging function. The reason why errors show up that are related to this file could be because the computer simply cannot read or load the file properly, which results in the error appearing. If this does happen to you it is highly recommended that you perform the necessary actions to fix this error immediately to be able to safely remove devices in future. The following tutorial will help you to fix the Hotplug error and return your computer back to normal.
The hotplug error is usually caused when Windows is unable to read or load the file and this can happen if the hotplug file is damaged or corrupt in anyway. This can cause the structure or format of the file to change inadvertently, so Windows will obviously find it harder to read this file or it may not even be able to read the file at all due to the damaging effects. In order to fix the hotplug problem, you need to find the root of the problem so you can start right from the beginning.
Firstly you should re-install any programs that you think could be causing the hotplug error on your computer. To do this simply:
Click Start,
Select Control Panel
Choose Add/Remove Programs or Programs and Features for Vista and 7 users.
Then look at the list of programs and select the one/s that you think could be causing the hotplug error on your computer and remove them.
Once you have successfully uninstalled the programs from your computer you can then re-install them.
After the re-installation it is recommended that you restart your computer.
Next you should manually replace the Hotplug DLL file because when you replace the file the computer will automatically think it is a fresh file and so this eliminates a degree of damages and corruption involved. To replace the Hotplug file, follow these steps:
Download hotplug.zip from the Internet
Unzip the hotplug.dll file and save in your computer's hard drive
Move to c:WindowsSystem32
Locate the current hotplug.dll on your system
Rename the current hotplug.dll to hotplugBACKUP.dll
Copy & paste the new hotplug.dll into C:WindowsSystem32
Click Start > Run (Or search "run" if you use Vista or Win7)
Type the command "cmd" in the box that appears
Type "regsvr32 hotplug.dll" on the black screen.
Finally it is highly recommended that you perform a scan on the computer's registry because we have made some significant changes deep inside the computer and it runs the risk of creating more errors than intended. The reason why it is recommended is because the registry is a virtual database that is composed of hierarchical files and settings that are vital to the computer's infrastructure and day to day operation. If the registry were to be altered or disrupted in anyway then the consequences could be very damaging.
You can check out how you can Fix The Hotplug Error and speed up your computer by checking out our site.
