subject: Useful Tips To Reap The Most From Your Printer [print this page] Useful Tips To Reap The Most From Your Printer
Is your printer not working properly? Whether you are using HP, Lexmark, Canon printer or any other brand, printer problem is common. Issues like paper jam, communication problem, etc. are frequent for all types of printers. For printer repair you can consult a computer support provider. In this article we have discussed some useful tips to troubleshoot common printer problems and get the best out of it.
Print cartridges are costly and you definitely want to get the most out of it. Now-a-days we perform so much photo and color print jobs. Sometimes, you may experience that the color runs out on the yellow and you need to replace the entire ink cartridge. You can extend the life of the print cartridges by just adjusting the settings. An expert can help you to perform this task.
Are you going to install a new cartridge? If yes, then open the front cover of the printer and remove all cartridges. The protective film needs to be removed from the cartridge before installation. Check the contacts on the new cartridge and then replace the cartridges in the correct place. If you are done, then close the front cover. Turn off the printer and switch it off and then turn on the power button and the printer.
Are you facing difficulties to install the printer? Check the Device Manager in the Control Panel. Make sure whether any Unknown Devices are showing there or not. The printer should display as an Unknown Device if you insert the cable in before installing the driver software. To fix this issue, you need to remove the Unknown Device. Then unplug the USB cable and install the software that you have got with the printer. Once installation is done, plug the USB cable back in.
If you find the printer is not doing anything when you click Print you need to check certain things. First, check whether the printer is connected to your computer or not. If there is a printer previously installed, and after that the new printer has been installed then the old printer might still be setup as the Default Printer. You need to change this setting. Go to the Control Panel, then access Printers. Here ensure the new printer is set to Default.
Frequent printer jam is a common problem. If you load too much paper then this problem may occur. Examine the entire mechanism and make sure no paper or any other obstruction is still inside. Also have a look at the internal gear. Make sure it is not damaged.
Remember the aforementioned things and make your printer perform at its best.
