5) Memory: Built-in 2GB/4GB internal memory, Support Micro SD card Max 4GB
6) Resolution of Video: AVI ,640*480
7) Resolution of Photo: JPEG,1280*1024
8) Quality Polaroid Lens from brand makers
9) Power consumption: 3.7V /320mAh
10) Player: Quicktime, Real player
11) Operation system: Win98, WinMe, WinXP, Win2000, Windows Vista
12) Highly recommended for journalists, traffic police, travelers, business, students Operation
Switch on
Press the play key for 4-5 seconds till the red LED turns on. Recording video and audio
1. Start to record
Press record/ save key one time shortly, the green light flashes 3 times then keeps on,
it is start recording.
2. Stop and Save
Press record/ save key one time shortly, the green will turn off after flashing 3 times,
the red light will be on. The video files will be saved automatically and the camera
back into standby mode.
Taking Photo
Under standby mode, press the play key one time, the green light turns on, then it
turns off and the red light turns on, indicating one photo is taken and saved, the
camera back into standby mode.
Switch Off
Press the play key for about 4-5 seconds will switch off the device manually, or insert the pin into the RESET hole, the device will power off also. Storage Spy Gadgets
If micro SD card inserted, the photo and video data will be saved into micro SD card first, wh-in flash memory. When space is full, LED light will stop blinking and start data saving; if built-in memory is full, device will shut off after data saving.
Reset
Insert the pin into the RESET hole to restart the device once it doesnot work normally under incorrect operations.
Charging
1) Charge the battery under power-off mode for fast recharge and best protection.
2) If failed to start the device, in most cases the battery is power off and needs to be recharged. For initial 5 charges, you are kindly requested to charge the li-polymer battery for at least 12 hours to ensure its best performance in future. Please do not charge it over 24 hours.
3) Usually a full charge requests 3-4 hours.
4) The red LED light turns on while recharging and turns off when battery is full
charged. battery first before use it.
Playback video
Connect the camera to your computer via USB cable to play back video.
Setting time
1) Connect the camera to computer via USB cable
2) Insert the manual CD and find a file named GetSysTime
3) Click GetSysTime.exe to update the date and time same, after this, the time of the camera will synchronize with the time of computer when you restart it again.
Attention
1) The system will save the video file firstly then turn off if low of power when taking video.
2) When taking video continually, the system will automatically generate a new
video file after each operation.
3) The time of PC recognizing the device is different according to its different system and configuration, so please not operate during recognizing. If the device device drivers, USB
port and the USB cable is normal, and then connect the hardware again. Spy Gadgets
