subject: PS3 Red Screen Of Death – More Information About The PS3 Red Screen And How To Fix! [print this page] PS3 Red Screen Of Death More Information About The PS3 Red Screen And How To Fix!
If you have a hardware failure on your PS3 that is a red screen of death then this article will tell you what is happening and how you can fix it.
The red screen appears when you switch your console on and it is similar to the red light except the main reason it appears with all the writing in different languages is because the GPU has overheated.
Now if you are getting the red screen error you will need to fix this by stopping the GPU from taking so much heat and you can do this by sending it into Sony and they will repair this for you at the factory.
This does not sound too bad until you start looking at the cost of the repair and you will be looking at about $150 for the fix!
Now there is an alternative way to fix it and that is to repair the system at home:
How To Fix Red Screen Of Death Alternative Method:
Since all you are doing is stopping the heat build up you could use a good repair guide that will show you with videos how to get rid of the red screen of death and get back in the game.
There are a few out there but you have to be careful with this and make sure that you get a guide that gives you a full fix with videos so you can see what you are doing.
Another thing that will be essential is a guarantee.
As an optional thing to look for as well videos can really help both on the sales page so you can see before you buy what sort of hardware is needed and how difficult it looks!
Although as you can see on this blog the guide we have is http://www.ylodrepairwizard.com and it has been getting some awesome feedback and this is because most of the errors apart from the disc reading problem which is the laser can be fixed at home!
If you are getting the PS3 Red Screen Of Death check out the full guide.
