subject: Start Powder Coating Business With Metal Pretreatment Chemicals [print this page] Start Powder Coating Business With Metal Pretreatment Chemicals
Powder coating (or P.C.)business is become very famous in every country. But everybody can not start it to make easy money. This business requires good knowledge of treatment of metal whether it is in the Phosphating tank treatment or monitoring the powder gun machine. So if you are planning to start a business in powder coating then you should have sufficient key skill to start it.
Here are few things that you keep on mind before starting business in powder coating.
1. Planning for equipments: This business requires a good working P.C. plant. A basic plant should have, tanks of different size as per requirement (these tanks can be made from plastic or steel iron), P.C. gun machine and chamber, burner or oven, and Metal Pretreatment Chemicals. These things can be very expensive but you can control the budget by get used tanks, oven and chamber.
2. Selection for metal pretreatment chemicals: Next important thing after equipments is metal pretreatment chemicals. Search for chemicals which has good quality and optimum price.Do not buy from them who give either too much or too less cost. P.T. chemicals play the key role in this business. If you do select the right person for chemicals then you will get last long business. So select best metal pretreatment chemicals with optimum prices. There are some of the good metal pretreatment chemicals manufacturers are present in market.
3. coating process: P.C. involves 7 tank process (some of them uses 9 tanks also but 7 tank is best option). seven tank process includes Degreasing Chemical tank, Degreasing Chemical water rinsing tank, Derusting Chemical tank, Derusting Chemical water rinsing tank, Zinc Phophating tank, Zinc Phophating water rinsing tank and Passivation tank. Each tank has its own function of working. After seven tank process the powder gun apply the powder paint over the metal surface and then it go to the over to cooking. when metal come out from the oven, it become powder coated.
4.Coating process for long length metal piece: For long length metal piece it is recommended to use 3 in 1 chemical which does phophating, derusting, and degreasing at on time. This process can be done by either dipping process or spray process. This process takes very less time and give very good result.
4. Troubleshooting: if you do not receive the desire result from the seven tank process then do not worry about that,simply call to the Powder Coating Chemicals supplier and he will solve the problem.
Powder coating business is the best option to choose for those who is in dilemma.
