subject: Cleaning Up Your Laser jet Q6000A Toner [print this page] Cleaning Up Your Laser jet Q6000A Toner Cleaning Up Your Laser jet Q6000A Toner
The ink in your computer is the source of life in your printer, and what ever the condition of your ink has its impact on the quality of the outputs. So if ever you have observe that the quality of your printouts is starting to worsen then better give time for it to clean it up, take time to remove the cartridge then give it a careful cleaning. Giving the time of cleaning up your Q6000A cartridge thoroughly will give you an assurance to lengthen its life span of use, and with that thought you can save a lot of money. By reading this whole review, you will know on how to clean up properly your toner. So here are the steps:
First thing you have to do is you have to open up the cover of the toner cartridge and take away the toner cartridge. Place the cartridge on the table or any flat surface with its bottom facing upward.
Second, you will start cleaning up the surface of the toner cartridge using a soft cloth. Then change the clothes as it will become contaminated because of the residue cause by the toner. You continue cleaning the outside part of the cartridge until you will see no more residues from it.
Third, when holding the Q6000A cartridge toner, you have to hold it facing upward then find the flap which covers the roller of the toner. Slide the back of the flap, when sliding the flap you have to be very careful. Then clean the toner roller using the soft cloth. Keep on cleaning until you will see no more residues in the roller of the toner, after cleaning let the flap slip back into its place.
Fourth, you also have to clean the inner part of the printer using a small size of the vacuum cleaner just like what you are using when cleaning up your computer parts. As years pass of using your printer, you will see some residue and paper dust inside in your printer that has accumulated from time to time of using, with this, the quality of your printouts will deteriorate.
Fifth and the last step, after cleaning your Q6000A cartridge toner you put it back in to the printer then close its cover. Put some laser printer sheets into the printer tray; be sure that it is a clean sheet, and do some test, print some outputs. With the help of these sheets, the ink residue and paper dust inside the paper tray of your printer will stick into the cleaning sheets; this sheet is slightly sticky that is intended to attract the debris inside the paper path and remove it. If you do not have any laser printer cleaning sheets then you have purchase some of it in the office supply market or you can also have it her, in the internet.
And now that you already know the steps in cleaning your Q6000A cartridge you will surely find it hard time on how to maintain or remain the good quality of its printouts.
