subject: The Important Procedures Of Air Conditioning installation [print this page] The Important Procedures Of Air Conditioning installation
Though technology helps us a lot, it needs us to help it work properly too. When you buy machines and bring them home they just don't start working. We need to fit them in their proper places, get them installed and connect them to their required source of energy for them to start working. And of course this is a work of a man. Machinery cannot start working it self. The famous device which keeps are environment cool also needs to be installed to work. It's not just a box that you buy, bring home, switch it on and it will start working. It needs proper servicing and installing. Air-conditioning installation is a very complicated work. Not every one can do it. There are special trained workers who work for companies, which sell air conditioners. When we have paid for the device, the service providers come at our home with our desired machine and set it to work.Before buying the air conditioner first you should calculate the area of the place you want to buy an air conditioner for. You should buy the size that best fits your area. First of all you need to install your condenser. This part of the air conditioning unit is usually placed outside. People prefer putting it either over the rooftop or outside in the garden. This is because the compressor needs empty space around it. There should be a pad placed under the compressor it should not be placed on the ground. There is an air conditioning unit, which has to be placed inside the room. There is a refrigerator coil that has to be connected to the indoor and outdoor unit. For that pipe a hole through the wall has to be drilled. Then an electrical wire is connected to the condenser, the other end of the wire is connected to switch board. The next step is to put the metal holding for the bracket of the air conditioner at its appropriate place. The bracket air conditioning unit should be placed on a wall at a certain height above the ground level. If it is placed on the ground the cooling will not be that effective. After the bracket has been set, the plastic covering of the air conditioning placed on it. Later it should be connected with electricity through its wire. Don't connect the electric wire before covering the air condition with its plastic cover as the bracket is a conductor of electricity and the person installing the bracket could catch current.Once the air-conditioning installation is done, you should always check if it is working properly. Set the thermostat according to your requirement and see if the room cools. When you turn the air conditioner on the first time it takes a little time to change the temperature of the room but in later days it works faster than before. Air-conditioning installation is not the type of work that everyone can do as this is a very technical work and it requires a lot of practice.
