subject: Decking Screws - How To Install? [print this page] Decking Screws - How To Install? Decking Screws - How To Install?
Constructing a deck can successfully add a great appeal and character to a home. It provides an extra space where one can seek peace of mind and relaxation. In order to ensure that that your deck is properly installed and lasts long, you must use decking screws that have superior quality. Using decking screws instead of nails can be a better alternative as screws can assure greater support in the long term. A decking bolt is different from the other types as it is stronger and resistant to rust. They are usually coated to prevent any reaction with chemical solutions applied on paint, stain, water and wood. Generally, stainless steel screws of superior quality are used to manufacture decking bolts. They can be used for projects other than decks. They find their uses in several indoor projects like putting up a drywall, reattaching a sidewall or installing a mailbox. If installed properly, decking screws can prove to be very versatile. Here are a few guidelines that may be useful for installing deck screws. 1. Place the board on top of the deck frame and mark the top of the board to indicate the exact point where each base board is located beneath the deck planks. 2. Make sure that you are drilling the bolts into the base boards properly, otherwise the screws would not end up connecting anything. 3. It is very important to position the screws correctly. Ideally, you must place the bolts 1 inch to the inside of the board edge. If the bolts are installed too close to the rim, the plank stands at a risk of getting splintered. 4. You must operate your drilling machine at the lowest speed so that you can control the depth to which the screws should go in. consider putting a weight on the drill so as to ensure that the bolts do not get drilled at any inclined angle. 5. Try to make sure that the screws are not too high or too low on the board. 6. The bolts should be roughly at the same distance apart. 7. The ultimate aim is to install the decking screws as if they are not noticeable. This helps in enhancing the appeal of the board. Do not compromise on the quality of decking screws if you are thinking of embarking on home improvement project. Screw Products Inc. deals with screws of top-notch class that can assure you of desirable results.
