subject: How to Install Vinyl Siding? [print this page] How to Install Vinyl Siding? How to Install Vinyl Siding?
If you want toinstall vinyl siding,bear in mind that this can be done by either the homeowner or you can it also by hiring a professional installer or contractor. Vinyl siding is one of the most commonly used siding nowadays. This is because there are various benefits that can be enjoyed when using vinyl siding materials. Your house will look more impressive, you will be able to save energy, no need for house paint and it is maintenance free.
In order for anyone toinstall vinyl siding,there is a need for a thorough preparation. One must ensure that the surface of an existing area is smooth and has a solid foundation. Any rotten wood must be removed and holes must be patched and properly sealed. You will need an insulator beneath the vinyl siding in order to have more insulation. This will control the moisture and at the same time provide a smooth and well ventilated surface that is ready for the installation of the material. It is necessary also to install furring strips to help and provide firm nailing and proper installation.
The Ways on How toInstall Vinyl SidingMaterials
Vinyl siding materials can be installed by cutting it according to your desired length. When installing sidings on doors and windows, J channel must be installed and in order to have contraction and expansion, the nails must be trimmed loosely.
Upon installing all of trims, you are now ready toinstall vinyl siding. The nail must be loosely fastened so that the piece can readily move. The next piece must be overlapped for one inch. For doors and windows, one quarter of an inch must be provided as an extra space for expansion.
One must put an under sill once you reach the top row. The width of the siding piece must be cut in such a way so that it will be snapped to the under sill.
Vinyl siding installation needs and requires all the cut and trim pieces to be installed on the wall before covering the wall surface. Before installing on windows, doors and other parts which needs siding materials, the trim pieces of vinyl must be installed first.
Vinyl siding installation will start and begin on the starter strips for it is the vinyl siding that will hold on to the base as well as into the walls.
Be sure to measure the top plate in each corner and marks it with a chalk liner. The center must be nailed with 10-inches interval and must have a inches interval for each starter strip in order to have an allowance for expansion.
It is necessary to install a J shaped channel between the doors and windows. The bottom piece must be installed first then the sides and lastly, the top. It should measure a 45 degrees angle with an overlapping sides keeping away from the windows.
