subject: Need Help to set up VOIP w/ WA3002G4 Router [print this page] Need Help to set up VOIP w/ WA3002G4 RouterNeed Help to set up VOIP w/ WA3002G4 Router
Do you connect in
Need Help to set up VOIP w/ WA3002G4 Router
(a) "Dialer" mode ( ID/PW entered in computer window )
Or
(b) "Always On" PPP/PPPoE mode ( ID/PW stored in modem wan page)
preferred.
Enable DHCP ( in LAN page )range 192.168.1.3 to say 192.168.1.10
Uncheck Mod mode ADSL+ box in DSL menu page ( for stability)
(c) confirm you can access the settings of the ( modem) unit supplied by them.
No need for static ip etc.
(the address of DUO can be entered in Port triggering option
Port numbers needed )
( I am using Vonage last two yearsDo you connect in
(a) "Dialer" mode ( ID/PW entered in computer window )
Or
(b) "Always On" PPP/PPPoE mode ( ID/PW stored in modem wan page)
preferred.
Enable DHCP ( in LAN page )range 192.168.1.3 to say 192.168.1.10
Uncheck Mod mode ADSL+ box in DSL menu page ( for stability)
(c) confirm you can access the settings of the ( modem) unit supplied by them.
No need for static ip etc.
(the address of DUO can be entered in Port triggering option
Port numbers needed )
Do you connect in
(a) "Dialer" mode ( ID/PW entered in computer window )
Or
(b) "Always On" PPP/PPPoE mode ( ID/PW stored in modem wan page)
preferred.
Enable DHCP ( in LAN page )range 192.168.1.3 to say 192.168.1.10
Uncheck Mod mode ADSL+ box in DSL menu page ( for stability)
(c) confirm you can access the settings of the ( modem) unit supplied by them.
No need for static ip etc.
(the address of DUO can be entered in Port triggering option
Port numbers needed )
( I am using Vonage last two yearsDo you connect in
(a) "Dialer" mode ( ID/PW entered in computer window )
Or
(b) "Always On" PPP/PPPoE mode ( ID/PW stored in modem wan page)
preferred.
Enable DHCP ( in LAN page )range 192.168.1.3 to say 192.168.1.10
Uncheck Mod mode ADSL+ box in DSL menu page ( for stability)
(c) confirm you can access the settings of the ( modem) unit supplied by them.
No need for static ip etc.
(the address of DUO can be entered in Port triggering option
