subject: The Fastest Way To Repair The PS3 YLOD [print this page] The Fastest Way To Repair The PS3 YLOD The Fastest Way To Repair The PS3 YLOD
Determining how you can mend a Playstation 3 in your own home is straightforward. Almost everything through the PS3 YLOD (yellow light of death) on to the red blinking light is a result of one important thing; the gaming console getting too hot. After you read this whole report you will see exactly why heat screws up the system and ways to stop and prevent it.
Scorching heat is definitely the number one challenge with almost all gadgets, it is the adversary of electronic components. A lot of heating can cause components to crash and may ruin your system. Every thing should be kept cool to work correctly, including your own Ps3 console.
Fans are first in the line of defence against temperature. They will convey cool air flow in and drive hot air away, this is actually the significant downfall to fans. There is no filter to prevent airborne dirt and dust and crud from getting in to your system. Whilst cool air is being drawn into the system hair, dust, airborne dirt and dust, and many types of other items are brought in at the same time.
Whilst airborne debris is being blown into your system it gets jammed on all types of areas. Everything from the system mother board to the little components that are soldered on to the main board tend to be locations where dirt and dirt are generally trapped. All of this crud gathers inside the system and keeps it from cooling down, it behaves as a blanket.
In the event the blowers in your system cannot cool the device alone it is termed overheating. Overheating, as I have mentioned, is usually the principle root cause of virtually all issues. Nevertheless, the great thing is it is an easy matter to correct.
To begin with, make sure you have sufficient area about the Playstation 3 to ensure that sufficient air can come in. I would suggest keeping at least one foot in all directions open and freed from obstruction. This will permit sufficient cool air to come in without it becoming halted or heated up by all sorts of things about it.
Second, be sure you don't have your Ps3 on the ground. Almost everything falls on the ground, from a hair floating in mid-air to dust out of your boots and shoes will end up on the ground. This will cause soil build up and can consequently cause over heating.
Next, and more importantly, reopen your PS3 and use a tin of pressurized o2 to get all sorts of things out. Blow off the main board, blow out the fans, and blow out any filth or crud you can view. I actually do this exercise just about every two months or so. This appears to be adequate time in between cleanings however it will vary to suit your needs based on your lifestyle.
