subject: 7 Basic Ways To Change Your Jewel Cases With Vinyl Sleeves [print this page] 7 Basic Ways To Change Your Jewel Cases With Vinyl Sleeves
If you want to utilize vinyl sleeves for your Cds and not jewel cases, you should ensure that you have the materials and devices prepared, fold the vinyl into a rectangular shape, begin sewing the vinyl using a sewing machine, bend the sleeves, transfer a compact disk into the sleeve you developed, transfer any other materials from the jewel case to the sleeve, and close the sleeve. Jewel cases are generally used as storage for Compact disks; however, such a device is quite fragile as well as heavy. They are able to take up a lot of space and are difficult to carry around. The good thing is that you can use other types of storage for your Compact disks such as vinyl sleeves. Vinyl sleeves are slimmer compared to jewel cases and so they consume a lesser amount of space. With such type of storage, your Cds are protected from scratches and other damage. Vinyl sleeves help you carry your Compact disks easier and conveniently and you do not need to bother about breakage. If you need to replace your jewel cases with vinyl sleeves, you can observe the following list of procedures: Make sure you have the supplies and tools ready For this kind of project, you will require a piece of transparent vinyl that is 11 inches square in size, a Compact disc kept in a jewel case, a sewing machine, a pen, and thread. Fold the vinyl into a rectangle You should locate a flat surface where you may do the job. Spread the transparent vinyl on your work space. Fold the piece of vinyl in half to make sure that it shapes a rectangular shape measuring about 5 by 11 inches. Use a ruler and pen to indicate the middle of the actual vinyl perpendicular to the fold with a line. Begin sewing the vinyl by using a sewing appliance The particular sew length of the sewing machine needs to be set to a long stitch or about 3 to 4 millimeters in length. You have to sew a seam which measures a inch down the shorter ends of the vinyl. Make sure that you stitch a next seam over the line which you labeled on the center of the middle. Flex the sleeve Before you can go on, you should make sure that the vinyl is flexed and correctly stretched. You might need to fold the material close and open and after that bend it. Move a Cd into the sleeve you constructed Once the sleeve you created has been extended appropriately, you can move your Compact disk into it. Open up the jewel case and get the Compact disc you kept inside. Slip the Cd into the vinyl sleeve thru the opening on one end. Move other supplies from the jewel case to the sleeve Several Disc jewel cases have pamphlets and other materials as well. You may pick which of these pieces of paper you would like to store and which you need to dispose of. Once you've decided, you may slip all of them to the opening of the sleeve which is opposite the Compact disk. Close the sleeve Once you've set all the things in the sleeve you want to preserve, you may close it. Accomplish this by folding the sleeve above the sewn seam. The great thing about this project is that it requires only basic sewing skills and materials that you can readily obtain.
