subject: How to install Radiant Barrier Installer in your Attic? [print this page] How to install Radiant Barrier Installer in your Attic?
It has been suggested that by installing radiant barrier installer on the roof, you can save up to 20% on the monthly bills of cooling and electricity. By installing Radiant Barrier Installer in your attic, you can stay cool in summer and feel warmer in winter. The methods that involves in maintaining temperature provides you maximum benefit and the products are really very cheap. In one hand you can save your money and in other you are playing a role model to save this environment. These installers follow natural process to maintain the temperature inside and outside of the room.
By installing Radiant Barrier Installer in your attic, you can stay cool in summer and feel warmer in winter. The methods that involves in maintaining temperature provides you maximum benefit and the products are really very cheap. In one hand you can save your money and in other you are playing a role model to save this environment. These installers follow natural process to maintain the temperature inside and outside of the room.
Here are some instructions to install Radiant Barrier Installer in your attic.
First prepare the things that are need for this projects; Staple Gun, Knife, Ladder, plywood, Mask and Torch light.
You must be aware that involving in this project is not secure. You need to walk on ceiling and decks. You must be familiar to the attic of your house where the barrier has to be installed. There may be electrical wires lying around the roof, so be careful. Try to avoid fiberglass.
Have some plywood to build an open standing platform so that you can stick barrier installer around it and create an open space for heat flow. Is the attic is on the higher place use your ladder but be comfortable with it; you might slip with your ladder.
Now the radiant barrier that you have stacked is now ready for staple. Staple your radiant barrier foil nicely so that they do not slip out making some holes. Create nice gap between two foils while stapling. It is the most sensitive part where the foils can tear apart. It is suggested that you create a gap of 2 inch for every staple you do.
Finish stapling on all the attics of your house.
Take a rest and provide some sound sleep if needed. Your work is done. The radiant barrier installer is now completed.
