subject: Why You Should Do Business With Companies Providing Water Jet Cutting Services [print this page] Why You Should Do Business With Companies Providing Water Jet Cutting Services
Do you make use of metal cutting or stone cutting services provided by third party organizations for your business? Then it might be a good idea to ask the service provider whether they employ waterjet cutting technology. The method involves using water mixed with abrasive materials to cut through sheets of metals and slabs of stone. Most modern companies use either water jet or laser cutting technologies, to deliver highly accurate end results. However, there are a few major advantages that waterjet cutting enjoys over other variants, which usually influence the favor of companies towards this technology. These include: 1.High precision during cutting: Water jet cutting allows incredibly precise cutting of metal sheets and stone slabs, down to the last millimeter. This is quite unlike other conventional tools, such as band saws and gas-operated handheld cutters, which leave a considerable margin for human error. The only other method capable of similar accuracies is laser cutting technology, and it costs a lot more. 2.Fewer or no deformities in finished products: The heat generated by conventional methods of cutting stone or metals often make the sheets and slabs warp to some extent. Stones can even develop small fractures from the high heat. The worst part is that many of these deformities will only be visible when you try to work with the finished product. These deformities are easy to avoid when using water jet cutting technology, since the amount of heat generated is not even enough to cause warping in paper, let alone metal or stone. 3.Environmentally safe: Water jet cutting does not cause any pollution of the environment. Any water that is used in cutting is also recycled, minimizing wastage of precious water. As such, Environmental Protection Agency (EPA) always favors it over other technologies. Indeed, staying on the good side of environmental organizations has never been easier! 4.Cheaper than other technologies: Water jet cutting is considerably less expensive than other popular methods of cutting stone slabs or metal sheets. This is because the system requires less energy to run, and employs just water mixed with abrasives as the cutting material. These are the reasons you should always work with companies that employ waterjet cutting. Colorado Springs region has many such companies known for providing excellent services at highly competitive rates. Look around a bit on the internet, and you are sure to come across names of many companies that can add good value to your business.
