Board logo

subject: External HD not found [print this page]


External HD not found
External HD not found

you can definately try to use USB 2.0 to IDE/SATA to connect the hard drive into your laptop, you can go for the USB 2.0 to IDE / SATA cable from Brando. Below are its specs:

Complies with USB 2.0

Backwards compatible to USB 1.1

Supports 2.5 and 3.5 IDE/SATA drives

Supports 3.5 SATA HDD up to 750GB

Supports IDE and enhanced IDE hard drives up to 500GB

SATA Interface: High speed data transfer rates up to 1500Mb/secyou can definately try to use USB 2.0 to IDE/SATA to connect the hard drive into your laptop, you can go for the USB 2.0 to IDE / SATA cable from Brando. Below are its specs:you can definately try to use USB 2.0 to IDE/SATA to connect the hard drive into your laptop, you can go for the USB 2.0 to IDE / SATA cable from Brando. Below are its specs:

http://install-how.blogspot.com/2011/03/external-hd-not-found.html

Complies with USB 2.0

Backwards compatible to USB 1.1

Supports 2.5 and 3.5 IDE/SATA drives

Supports 3.5 SATA HDD up to 750GB

Supports IDE and enhanced IDE hard drives up to 500GB

SATA Interface: High speed data transfer rates up to 1500Mb/sec

ATA/ATAPI: Support 16-bits DMA and Ultra DMA mode interface (Ultra 33/66/100/133)

Dual Mode: Support bisynchronous mode, compatible to SATA and IDE device simultaneously

http://install-how.blogspot.com/2011/03/external-hd-not-found.html

Complies with USB 2.0

Backwards compatible to USB 1.1

Supports 2.5 and 3.5 IDE/SATA drives

Supports 3.5 SATA HDD up to 750GB

Supports IDE and enhanced IDE hard drives up to 500GB

SATA Interface: High speed data transfer rates up to 1500Mb/sec

ATA/ATAPI: Support 16-bits DMA and Ultra DMA mode interface (Ultra 33/66/100/133)

Dual Mode: Support bisynchronous mode, compatible to SATA and IDE device simultaneously

ATA/ATAPI: Support 16-bits DMA and Ultra DMA mode interface (Ultra 33/66/100/133)

Dual Mode: Support bisynchronous mode, compatible to SATA and IDE device simultaneouslyyou can definately try to use USB 2.0 to IDE/SATA to connect the hard drive into your laptop, you can go for the USB 2.0 to IDE / SATA cable from Brando. Below are its specs:

Complies with USB 2.0

Backwards compatible to USB 1.1

Supports 2.5 and 3.5 IDE/SATA drives

Supports 3.5 SATA HDD up to 750GB

Supports IDE and enhanced IDE hard drives up to 500GB

SATA Interface: High speed data transfer rates up to 1500Mb/secyou can definately try to use USB 2.0 to IDE/SATA to connect the hard drive into your laptop, you can go for the USB 2.0 to IDE / SATA cable from Brando. Below are its specs:you can definately try to use USB 2.0 to IDE/SATA to connect the hard drive into your laptop, you can go for the USB 2.0 to IDE / SATA cable from Brando. Below are its specs:




welcome to loan (http://www.yloan.com/) Powered by Discuz! 5.5.0