subject: Resinous flooring- Facts and Generalities [print this page] Resinous flooring- Facts and Generalities
The best part about resinous flooring is that it is simply a very cost-effective & logical option. There are many different reasons why it has become popular. Among the top ones is the fact that resin floors are absolutely resistant and durable. This is the ultimate option because this way, you wont have to face expensive repairing. Yet, there are some people that are still dubious about such styles. You might as well consider reading reviews written by many business owners to remove doubts.
Easy process
If you think that resinous floors are not an option for you, you should know that enhancing your current floor is more effective and also cheaper than getting a new floor. Since resinous flooring is normally thicker than any types of floors, raking and finishing it shouldn't be too complicated. All you have to do is just follow a few steps.
Prior to getting resinous floors, you need a serious clean up, in order to eliminate wax or residual paint. This is normally done with a special shampoo. If the floor was covered with a moquett, the adhesive and synthetic sponge marks are visible and need to be removed. If the wood was painted, use a disinfectant to attenuate and clean the paint. These actions need special care for resinous flooring; otherwise the next steps may be failures. Wash out the floor with water and then let it dry. Now it is the perfect time to locate cracks and damaged tiles. If you want fancy resinous floors then you need to replace these spots with new coats and parts.
More Steps
The next step for obtaining resinous floors implies polishing. A professional polishing is done in three steps, with abrasive bands that increase their delicacy. Their granulation muse raise goes from 36 to 50-60 and finally to 100-120. Don't forget about the tiles direction. It's very important when you consider resinous styles.
Painting options
Painting these floors also comes in three possibilities: whitewash, paint or lacquer. Lacquer gives points to the wood fibers, by giving them a contrast. If you choose lacquer, you will need to do it two times to ensure a good lacquering. Whitewash is a colorant that needs to be fixed with two layers of lacquer. Paint is a bit pickier with resinous flooring, but it is much more recommended for wood. Keep in mind that you need to apply it in maximum three layers and drying takes up to 3-4 days. Wax is a finishing product. It will apply on these floors in two layers, at 12 hours. Liquid wax is the most recommended one, especially if you combine it with turpentine (10%). Last, but not least, these floors need an ecological treatment. It is similar to waxing the floor, just that also easier to do. Avoid warming the room for a few days. The humidity must not get over 10%, while the temperature of the room should be of maximum 12 degrees Celsius. Don't worry; everything will be done soon after so you can enjoy your new floors.
