subject: Construction Water Proofing Chemicals And Complete Waterproofing Solutions [print this page] Welcome to Ultracon Infrachem (P) Ltd., a company with market-leading companies and a variety of development substances. Regardless of your backdrop what you will find at Ultracon is an environment that requests the best of every worker in every area. We search for out and compensate the best skills so that we can keep provide high-quality, best-value goods and services i.e. Underground room Water resistant, Tangible Water resistant, Specialized Chemicals, Tangible Treating Substance and Extremely plasticizer. You will advantage from Ultracon strong points in leading-edge technological innovation, excellent client support, and excellent marketing and distribution.
Ultracrete is an preservative plastic concrete composite for versatile use i.e. submerged portions, rooftops, pool, water tanks etc. for surface protection, repair, recovery, floor leading, durable & visual external & visual external finish with concrete paint, repairing of tangible and brickwork, joining tangible to tangible etc..
Ultracrete polymer is mixed with neat cement in the ratio of 2 kg cement: 1kg of Ultracrete it should be stirred thoroughly until no air bubbles remain in the mix.
The mix has to be applied by brush on the prepared surface. Two or more coats are recommended. First coat should be allowed to air dry for 5 6 hours before application of second coat.
Ultracrete techniques must be used at heat range above 10C and ideally below 35C during the first 12 time of treating. It must be secured from corrosion, rainfall and other negative circumstances. No visitors should be permitted on an Ultracrete handled surface within 48 time of program of last of Ultracrete preliminary air dehydrating should be done for 2- 6 time. During this interval no water is to be used for treating. After highest possible interval of last programs wet treating should be done for the next 24 time by way of treating water on Ultracrete covering. During this interval at no point of time should the Ultracrete covering be remaining absolutely dry or sunken in water? Flooring surfaces wet treating. The Ultracrete covering should be permitted to air dry for three days before submersion in water or as required for used.
Features:-
Combines water proofing with tough & hard wearing surface, allows trapped vapors to escape thus preventing peeling and blistering.
Develops excellent bound to most of the building materials.
Is highly durable in continuous wet conditions.
Is not affected by ultra violet rays & by chemicals ranging from mild acids to strong alkalis.
Most properties improve with age.
Bounding aid for the new and old concrete / mortar repair & patching of concrete.
