subject: Daswell Foam Concrete Mixer With High Efficiency [print this page] The foam concrete mixer operation requires compressed air supplied under pressure of not less than 0.1 MPa and delivery rate not less than 0.26 m3/min.
The foam concrete unit is intended for the cyclic preparation and transportation of aerated concrete based on mineral and viscous fillers, a foam former and water, for arrangement of solid monoliths (blocks, walls, floors) made of aerated concrete having an average density (400 1000) kg/m3 in a dry condition.
The concrete mixer can operate free-standing or as a part of units, stations, lines operated at construction sites supplied with electric power, water and compressed air.
1. The foam blending fast, blowing foam uniformly.
2. Without suspended matter, without the declining, its good for steady pouring.
3. Little loss ratio of foam maintain the foam proportion in the foam concrete to make the products with stability density.
4. No dead angle design, mixing the material toughly, storage in its bottom is less than 10mm, no material left on the four walls internal the mixing drum.
5. It could mixing variable materials, such as cement, fly ash, sand pulp, sand stone, perlite, and slag etc.
6. Variable speed mixing and internal structure alteration make its installation easy and mixing frequency high, it saves energy.
Foam concrete mixer is one new type concrete mixing machine, apply for producing foam/lightweight concrete, foam/lightweight is light, thermal and sound insulation, and fireproofing, have more advantages than normal concrete, so it is applied for many construction projects now.
Selling is not the end, but the beginning of the service. About service, we are more attentively; about Quality, we are more reliable; about smile, we are more sincere.
Any question or request in this filed, welcome to contact us freely. We sincerely welcome friends from all walks of life to visit our company and create a glorious tomorrow hand in hand.
