subject: How To Fix A Leaking Showerhead Faucet [print this page] Most home owners never comprehend that a leaking showerhead is pretty straightforward to repair. There is no need to order a new one or, worse however, hire a plumber. You can finish the job oneself in just a handful of brief minutes with nothing far more than a screwdriver, an adjustable wrench, and a washer that you can shop for for a nickel at any hardware store.
Now that you have decided to take on the job oneself, you need to have to have an understanding of the two most standard items that go incorrect with showerheads. Either they start out leaking at the point where the pipe screws into the actual showerhead, or the holes in the showerhead come to be clogged, causing water backups and developing a leak.
Initial, you are going to need to have to unscrew the showerhead from the outlet pipe. To guard the showerhead from harm, wrap a towel about the point exactly where the head screws onto the outlet piping. Take the pliers and get rid of the head from the outlet. You'll see the washer. Pull it off and replace it with the new 1. If you consider you require a tighter seal, use plumbers tape across the threads prior to screwing the showerhead back in.
Also, if you have a rotating or swiveling showerhead, you may as well take an additional step even though you have it taken apart. To raise the swivel range and flexibility, take some lubricant, ideally silicone, and lube up the interior swivel ball ahead of you screw the head back in.
If the holes in the showerhead are clogged, take off the faceplate by removing the screws attaching it to the head. If you can not take away the faceplate, that is okay, just keep the entire unit unscrewed. The reason showerheads get clogged is the lime deposits that are formed and get stuck in the holes more than time. To get rid of the lime deposits, take either the faceplate or the entire showerhead, and soak it in a bowl of white vinegar for at least eight hours. This will dissolve the deposits, and make them easy to get rid of by sticking a toothpick or little nail through the holes in the showerhead. Soon after that, scrub the faceplate with a stiff plastic brush and screw the unit back into the wall.
