subject: Reasons For The Strong Swing Of Sand Maker [print this page] Reasons for the strong swing of sand maker
Sand making equipment is a rising star in China's mining machinery market, impact sand making machine is a type in sand making industry, impact sand making machine is generally used in industries such as cement, stone, as well as crushing mechanisms sand for building, impact sand making production and efficiency is higher than other types of crushing machine.
Impact sand making machine in the application process may occur some failures, in order to work more efficiently, staff need to understand the failure, and be able to quickly resolve them. Such as the particularly strong swinging situation is likely due to the following:
First, crusher impeller wearing parts wear is more serious. Impeller wearing parts wear will cause unstable internal operation and cause swinging too largely; at this , as long as changing wearing parts to make sand making machine internal impeller reach a state of equilibrium is ok.
Second, feed particle size is too large may cause the device to swing too large, in sand making machine design, maximum feed size is generally 4-5 cm, in general equipment feed size of 3-4 cm can reach up to the largest amount of finished sand; too large particle size will cause the device swing is too large; if too small, the inadequate feed collision is difficult to achieve the required amount of finished sand.
Third, the impeller obstruction can also cause uneven feeding and too large body swinging; it can be solved as long as remove impeller aisle obstruction.
First time to solve the impact sand maker situation is necessary for master; I believe that master sand making troubleshooting method will be able to save a lot of time in using process in future, improve efficiency, and create greater value for them.
