subject: Magnetic Rod, Magnetic Lifter, Rare Earth Rod, Channel Magnet [print this page] Magnetic Rod: Magnetic Rod:
Rare Earth Rod Magnets are extremely efficient at removing fine iron contamination from free flowing products such as ceramics slurry sugar, grain, tea, flour, granulate and any other types of powder with a low moisture content.
This item can be supplied with blank, tapped or studded ends for ease of installation. Rods are 25.4mm (1") in diameter, 32 mm diameter, 40 mm diameter and 50 mm diameter.
Rods are particularly useful for those engineers who wish to build their own separator units or have severe room restrictions and are not able to accommodate a conventional unit.
This product contact parts are manufactured using 304 and 316 grade stainless steel
Rare - earth Permanent lift magnetic, turned On and OFF manually by lever provide smooth operation for hundreds of lifting and positioning application. These magnetic are ideally suited for in plant handling, loading /unloading of machine tools, in machines shop, Plastic modules machined components, etc. No electricity needed, no batteries to or replace don't threaten safety Guarantees continuous, Complete magnetic power, even after years of intensive use. Available with 'V' face pipes rounds and other hard to handle shapes. Available in 100 to 5000 kg rated lifting capacities with 33% safety factors that means magnetic are testing over 3 times the rated load.
Magnetic Lifter are designed to eliminate scrap iron tramp metal from the raw material, Used in Recycling, quarrying and heavy industries.
Offered in fabricated cases, with coils and terminals sealed and protected to ensure watertight construction and low maintenance costs. Sizes range from 530mm to 1525mm in diameter to suit all crane sizes and models. Magnets are designed for cool operation and minimum reduction in lift capacity, to provide maximum lift performance throughout the working day.
Cases are constructed of high-permeability, low carbon steel for minimum magnetic leakage and maximum lifting efficiency. Bottom plates are heavy manganese steel. Class H insulation is used throughout the magnets for extended life.
Rod Type Channel Magnet:
Rod Type Channel Magnets is made for slurry or grinding material, it captured ferrous contaminants from being washed off from oncoming product, a trap face design should be chosen. A trap face is a tapered step on the magnets working surface. This trap is placed at a position within the north and south magnetic fields that cause captured ferrous contaminants to be drawn to the underside of the trap where they are safely held on to, preventing was hoff from oncoming product.In rod type channel Magnets usually have a 1 or 1.5 inch magnetic rods The magnetic configuration ensures maximum exposure of contamination to the high intensity rods without impeding liquid flow. Channel Magnet are available in double wall jacketed. In s.s.304 and 316 steel, designs capable of working at unlimited magnetic bar are available on request.
For more details visit our website: http://www.excelmagnetics.com
