subject: How To Repair A Blackberry With Ease [print this page] There are people who have mechanical capacities and they prefer to repair things themselves and not go to a specialist to do it. In the case of Blackberry repairs there are some things that everyone with some technical skills are able to perform with ease. It may happen that the phone accidently was dropped into water of all kinds or on the floor. This thing might have caused the lens to scratch or the gadget not to function properly. For such instances there are many things which can be done in order to repair it.
There are some tools which should be used for repairing and they can be found in every store. A person would need a cloth, a set of screwdrivers of normal or miniature size and prying tools. The only problem with taking apart the Blackberry is that the warranty will be lost and this means that the operation should be done only on the ones out of warranty. After you have everything in the right place and in short reach, the process can be started with ease. The first step is to remove the card, the SIM and the battery and its cover. For this to be done, the phone is placed with its face down and the cover is taken out. After this procedure a person should take out the SIM and the battery followed by the microSD card. The Torx screws need to be removed by using the proper screwdriver. If you do not have them, it is better to use tweezers so as not to turn over the phone when it is not necessary. The screwdriver needs to have the right head and size in order to remove the screws. After this the internal frame can be removed so that the inside of the phone is visible.
After this process is done the parts can be removed or cleaned with ease. The parts can be bought either from the internet or from a local store. It is also advisable to clean the trackball in the event that you open up the phone. It is held by a silver ring and care needs to be involved to do it properly. The trackball should be cleaned with a dry cloth. The inside of the housing should be cleaned because it is the location of the sensors. This needs to be done swiftly as not to destroy the sensors. In the case of a scratched lens, this can be replaced easily after dismantling the phone. After it is replaced, the lens needs to be polished with care. This means that the cloth can be used so there are no scratches left.
The Blackberry repairs are not that hard to do and everyone can attempt to replace a piece. It is true that for other things, a specialist is required, but in many cases this will be totally useless because everyone will be capable of getting the same results without the problem of having to pay loads of money.
