subject: 6 Main Elements For The Assembly Line Arrangement [print this page] Usually, manufacturing Factory with large scales will purchase one or more Assembly Line to make sure the running. We can say, any mass production of the final product with a variety of parts adopts assembly line production in a way. It is very important to the continuous production line connected by a number of materials handling equipment.
Several aspects all together determine if the assembly line is scientific and productive. Layout of the assembly line must be carefully, otherwise the designed product, expensive equipment and good sales will be ruined by the poor layout of the assembly line. At the same time, the layout of assembly line combines with modern management to consider how to manage. Therefore, the assembly line is affected by assembly line equipment, products, personnel, logistics, transportation and production methods and other factors.
1. Equipment and Products
The choice of process equipment determined by technical requirements can not only increase productivity, reduce manufacturing costs, but also to make the assembly line layout process rationalization. Product structure and assembly process design is the focus of the primary consideration in the assembly line layout. The analyses, research, suggest improvement to product structure can greatly simplify the assembly line production process.
2. The mode of production
Mode of production is one aspect to consider when the assembly line layout, to consider the use of automated line or assembly line production; single production or fleet production; management methods, means to ensure rules and regulations under the production management methods.
3. Assembly line in Logistics and Transport
Material flow through the transport to complete. Material transport is essential in the factory. We should choose the economical and reasonable mode of transportation.
4. Storage and ancillary facilities
Material flow always stream to the end of the assembly process, but whenever material interruption, there will be discontinued to be expected. Therefore, we need to protect leave a certain amount of reserves in order to ensure the flow of material flow on the assembly line, this is economically reasonable to maintain production and balance process.
5. Plant structure
The plant once had been build, the variable is relatively small. Therefore should be carefully considered in the design, determined plant structure according to production characteristics. Generally we adopt a common plant. Multi-storey factory building should be based on the assembly line considering the layout of the process characteristics and area of floor.
6. Layout variability of assembly line
With the advances in science and technology, the adoption of new technology and new equipment also requires us to adjust the old assembly line layout. For this reason, graphic design should consider plant development, the feasibility of the change. The assembly line layout should have the flexibility, adaptability and versatility.
The assembly line is an effective combination of man and machine that most fully embodies the flexibility of the device. Organic combinations of conveying systems, on-line plane, and testing equipment meet the assembly requirements of the more varieties of products. So it is an integral part in the mass production of the enterprise.
