subject: Talk About The History And Maintenance Of The Automatic Dispenser Filling Plastic Machine [print this page] With the progress of science and technology, people's living standard is improving constantly, production technology has been to automation, constantly improve our production capacity. This time the dispensing machines emerge as the times require.
Dispenser generation dates back to the period of the sixties, in plastic bottles, plastic extrusion, manual dispensing even toothpick dispensing backward case, many industry need to dispense huge defective products, resulting in batch not make up for the loss of orders, so in the sixties, the birth of the manual dispenser With the development of automation technology, manual dispenser has been far from being able to meet the needs of industrial, in the early eighties, automatic dispenser come out. Science and technology are primary productive forces, the advent of the automatic dispenser made a great impetus to the industrial demand.
Dispensing equipment, this is a far from mature fields: international a little can be a little dispenser easily hundreds of thousands to hundreds of thousands, ranging from but also tens of thousands, the maintenance of the dispenser is extremely focused, the Qunli collection years of production experience and other feedback information summarizes the contents:
1. Replacement of the types of plastic pipe to be cleaned. Close the discharge valve to close the feed valve, open the discharge valve to discharge the remaining rubber plastic buckets, feed valve opens cleaning solvent into the reservoir plastic barrel, activating the body, according to the usual mode of operation of the solvent pressure a flush.
2. Pressure intake is not normal and moisture, set the regulator to exclude water vapor within the filter or check the air pressure source signs of anything can be. Dispenser a small number of trial before the large-scale use of the glue, please, to master the skills of use of the product, in order to avoid errors when the test no problem, then double droplets plastic machine or dual liquid glue filling machines for the production of large quantities; pumping the vacuum system of the glue for the vacuum defoaming treatment to eliminate the air bubbles generated in the mixing process.
3. Machine parts, please regularly wipe clean, in order to increase the service life. The more amount of glue mixed together, the faster the reaction, the curing speed will be faster, so according to the actual production situation rationally with glue, otherwise cause the glue waste. Exclude accidents, improve production efficiency.
Second is the machine for longer periods of time should unplug the power supply, so that not only can extend the life of the machine, but also saved a lot of electricity.
