subject: Perhaps The Top Waste Baler Manufacturers In The World! Which Electrical Power Source Is Best For Yo [print this page] I have been working in the Waste Recycling Business, for a number of time. I really deem myself to be entirely informed about the numerous Recycling machine Models made around the world.
Among the key problems with small recycling baler equipment, is the motor size. Usually, a small cardboard baler is powered with a 220/240v motor, in Europe and 110v motor, in USA. The throughput and torque of these small voltage motors is not so powerful. They generally run at a very high temperature and it is a common problem for the capacitors (and also the motors) to burn out. The key reasons for using a small 240v motor is because it is a little cheaper and a good number of small establishments don't have a 3 Phase Power Supply.
These small plastic baler machines can produce cardboard bales ranging from 20kg to 80kg and plastic bales ranging from 40k to 150kg. They are suitable for: small businesses, schools, colleges, manufacturers, hotels, restaurants, shops, transport companies etc. A good number of these establishments are not blessed with a 3 Phase Power Supply. But if they were, then a 3 Phase motor on their recycling machine, would be much more efficient and reliable in the long term.
Another predicament that frequently occurs, is particular sizeable warehouses may have need of a much bigger waste baler appliance, but they also don't possess any 3 Phase Power Supply. They may need a V250 or V500 Cardboard Baler, because their volume of cardboard or plastic waste is much higher.
A quantity of manufacturers do manufacture the V250 waste baler, using a 240v motor, but this can prove expensive and unreliable in the long term. This is because the motor works so hot and both the capacitor and electric motor can burn out and be dear to repair.
The V500 Waste Baler Machine is by and large ALWAYS manufactured with a 3 phase electric motor. However many locations don't possess the 3 phase electric power supply. There is either a great cost to have the power supply modifications or the company has to do without their ideal baler; and can't recycle efficiently.
In recent times, I have worked with a particular Baler Machine Manufacturer closely, known as Strong Recycling Balers Ltd. They are UK based and deliver cardboard balers Worldwide. They now resolve every one of the problems above with some very innovative techniques.
Both their smaller waste balers, such as V40i and V70i, are fitted standard with a 3 phase electric motor. Although there is a 415v 3 phase electric motor - the machinery only needs a single phase 220/240v electric power supply. Furthermore, the V250 and V500 (Mill Size Baler) are not surprisingly fitted with 415v 3 phase electric motors, but it is possible to use either a 220/240v single phase or 415v 3phase on this machinery. It is your decision at the order stage.
So whatever your requirements for a recycling machine ranging from small to mill size, I would encourage anyone to look on the Strong Recycling Balers web site. This is because they will without doubt utilize superior electric motors in assembly and your electric power supply wants can always be easily catered for. You can also call them directly on Tel +44 1384 567773.
