subject: Most Likely The Top Mill Size Balers Provider In The World! What Electrical Power Source Is Ideal Fo [print this page] I have been working in the Waste Recycling Industry, for a number of years. I truly think myself to be quite educated about the different Mill size baler Designs supplied around the world.
Among the chief problems with small cardboard balers, is the electric motor size. As a rule, a small cardboard baler is driven with a 220/240v motor, in Europe and 110v motor, in USA. The throughput and torque of these small voltage motors is not so powerful. They regularly operate at a very high temperature and it is a common problem for the capacitors (and even the motors) to burn out. The main factors for using a small 240v motor is because it is a little inexpensive and the majority of small establishments don't have a 3 Phase Power Supply.
These small waste baler machines can make cardboard bales ranging from 20kg to 80kg and plastic bales ranging from 40k to 150kg. They are suitable for: small businesses, schools, colleges, manufacturers, hotels, restaurants, shops, transport companies etc. The largest part of these establishments are not blessed with a 3 Phase Power Supply. But if they were, then a 3 Phase motor on their waste baler machinery, would be much more efficient and reliable in the long term.
Another dilemma that often occurs, is certain sizeable warehouses may have need of a much bigger waste baler machine, but they also don't possess any 3 Phase Power Supply. They may want a V250 or V500 Cardboard Baler, because their quantity of cardboard or plastic waste is much higher.
Particular manufacturers do manufacture the V250 waste baler, using a 240v motor, but this can prove expensive and problematic in the long term. This is because the electric motor runs so hot and both the capacitor and motor can burn out and be costly to fix.
The V500 Millsize Baler is generally ALWAYS constructed with a 3 phase electric motor. Although several sites don't have the 3 phase power supply. There is either a big price to have the power supply modifications or the company has to do without their ideal baler; and can't recycle efficiently.
In recent times, I have watched a specific Recycling Baler Equipment Manufacturer closely, known as Strong Recycling Balers Ltd. They are UK based and supply recycling balers Worldwide. Strong Recycling Balers ltd now resolve every one of the problems above with a few very forward-thinking techniques.
Both their smaller waste balers, such as V40i and V70i, are fitted standard with a 3 phase motor. Though there is a 415v 3 phase motor - the machines only needs a single phase 220/240v electric power supply. In addition, the V250 and V500 (Mill Size Baler) are naturally fitted with 415v 3 phase motors, but it is possible to apply either a 220/240v single phase or 415v 3phase on this machinery. It is your decision at the order stage.
So no matter what your requirements for a waste baler ranging from small to mill size, I would urge everyone to look on the Strong Recycling Balers web site. This is because they will automatically apply better motors in construction and your electric power supply wants can always be easily catered for. You can also call them directly on Tel +44 1384 567773.
