subject: Perhaps The Best Millsize Balers Supplier In The World! Which Electrical Power Supply Is Perfect For [print this page] I have been working in the Waste Recycling Industry, for a number of years. I genuinely think myself to be entirely knowledgeable about the various Recycling machine Makes built around the world.
Probably the main problems with small waste baler equipment, is the motor size. As a rule, a small cardboard baler is driven with a 220/240v motor, in Europe and 110v motor, in USA. The throughput and torque of these small voltage motors is not so powerful. They as a rule run at a very high temperature and it is a common problem for the capacitors (and even the motors) to burn out. The chief motives for using a small 240v motor is because it is somewhat more affordable and a large amount of small establishments don't have a 3 Phase Power Supply.
These small plastic balers can produce cardboard bales ranging from 20kg to 80kg and plastic bales ranging from 40k to 150kg. They are appropriate for: small businesses, schools, colleges, manufacturers, hotels, restaurants, shops, transport companies etc. The largest part of these establishments are not blessed with a 3 Phase Power Supply. But if they were, then a 3 Phase motor on their cardboard balers, would be much more efficient and reliable in the long term.
An alternative predicament which frequently occurs, is some sizeable warehouses will require a much bigger cardboard baler appliance, but they also don't possess any 3 Phase Power Supply. They may need a V250 or V500 Waste Baler, because their quantity of cardboard or plastic waste is much higher.
Some manufacturers do manufacture the V250 waste baler, with a 240v motor, but this may prove costly and inefficient in the long term. This is because the electric motor operates so hot and both the capacitor and electric motor can burn out and be expensive to fix.
The V500 Mill Size Baler is in the main ALWAYS manufactured with a 3 phase electric motor. However some sites don't possess the 3 phase power supply. There is either a large expense to have the power supply modifications or the company has to do without their ideal baler; and can't recycle effectively.
In recent months, I have worked with a certain Plastic Baler Machine Manufacturer closely, named Strong Recycling Balers Ltd. They are UK based and provide baler machinery Worldwide. Strong Recycling Balers ltd now solve all the problems discussed with several very cutting edge methods.
Both their smaller waste balers, e.g. V40i and V70i, are fitted standard with a 3 phase electric motor. Though there is a 415v 3 phase motor - the machines only needs a single phase 220/240v power supply. Furthermore, the V250 and V500 (Mill Size Baler) are of course fitted with 415v 3 phase electric motors, but it is possible to make use of either a 220/240v single phase or 415v 3phase on this machinery. It is your decision at the order stage.
So no matter what your requirements for a waste baler ranging from small to mill size, I would encourage anyone to browse on the Strong Recycling Balers web site. This is because they will automatically use superior electric motors in construction and your power supply needs can always be easily catered for. You can also call them directly on Tel +44 1384 567773.
