subject: Perhaps The Top Waste Baler Equipment Providers In The World! What Electrical Power Source Is Perfec [print this page] I have been working in the Plastic Recycling Industry, for a number of years. I truly think myself to be pretty clued-up about the various Plastic baler Makes made around the world.
One of the chief problems with small plastic balers, is the electric motor size. As a rule, a small recycling machine is powered with a 220/240v motor, in Europe and 110v motor, in USA. The throughput and torque of these small voltage motors is not so powerful. They generally operate at a very high temperature and it is a common problem for the capacitors (and also the motors) to burn out. The key motives for using a small 240v motor is because it is slightly less costly and the majority of small establishments don't have a 3 Phase Power Supply.
These small plastic balers can produce cardboard bales ranging from 20kg to 80kg and plastic bales ranging from 40k to 150kg. They are suitable for: small businesses, schools, colleges, manufacturers, hotels, restaurants, shops, transport companies etc. Most of these establishments are not blessed with a 3 Phase Power Supply. But if they were, then a 3 Phase motor on their cardboard baler machinery, would be much more efficient and reliable in the long term.
A different catch that frequently occurs, is some large warehouses will want a much bigger baler machine, but they also don't possess any 3 Phase Power Supply. They may necessitate a V250 or V500 Cardboard Baler, because their volume of cardboard or plastic waste is much higher.
A number of manufacturers do construct the V250 waste baler, with a 240v motor, but this may prove expensive and inefficient in the long term. This is because the electric motor works so hot and both the capacitor and electric motor can burn out and be pricey to repair.
The V500 Millsize Baler is in the main ALWAYS built with a 3 phase electric motor. But various sites don't have the 3 phase electric power supply. There is either a large price to have the power supply modifications or the company has to do without their ideal baler; and can't recycle effectively.
In recent months, I have watched a particular Waste Baler Machine Provider closely, known as Strong Recycling Balers Ltd. They are UK based and supply cardboard baler equipment Worldwide. Strong Recycling Balers ltd now solve every one of the problems above with certain very innovative techniques.
Both their smaller waste balers, such as V40i and V70i, are fitted standard with a 3 phase motor. Although there is a 415v 3 phase motor - the machines only uses a single phase 220/240v electric power supply. In addition, the V250 and V500 (Mill Size Baler) are naturally fitted with 415v 3 phase motors, but it is possible to apply either a 220/240v single phase or 415v 3phase on this machinery. It is your choice at the order stage.
So no matter what your needs for a waste baler machine ranging from small to mill size, I would urge everybody to look on the Strong Recycling Balers web site. This is because they will certainly utilize better electric motors in assembly and your electric power supply needs can always be easily catered for. You can also call them directly on Tel +44 1384 567773.
