subject: In All Probability The Top Mill Size Balers Suppliers In The World! What Electrical Power Supply Is [print this page] I have been working in the Cardboard Recycling Business, for a number of years. I really believe myself to be extremely informed about the diverse Millsize balers Designs provided around the world.
One of the key problems with small waste baler equipment, is the electric motor size. Mostly, a small waste baler is powered with a 220/240v motor, in Europe and 110v motor, in USA. The throughput and torque of these small voltage electric motors is not so powerful. They customarily function at a very high temperature and it is a common problem for the capacitors (and even the motors) to burn out. The chief reasons for using a small 240v motor is because it is slightly less costly and a good number of small establishments don't have a 3 Phase Power Supply.
These small waste balers can make cardboard bales ranging from 20kg to 80kg and plastic bales ranging from 40k to 150kg. They are suitable for: small businesses, schools, colleges, manufacturers, hotels, restaurants, shops, transport companies etc. Most of these establishments are not blessed with a 3 Phase Power Supply. But if they were, then a 3 Phase motor on their recycling baler machinery, would be much more efficient and reliable in the long-term.
An alternative catch that often occurs, is certain large warehouses will require a much larger baler appliance, but they also don't have any 3 Phase Power Supply. They may require a V250 or V500 Mill Size Baler, because their amount of cardboard or plastic waste is much higher.
A number of manufacturers do make the V250 waste baler, with a 240v motor, but this may prove costly and inefficient in the long term. This is because the motor runs so hot and both the capacitor and motor can burn out and be pricey to repair.
The V500 Waste Baler Machine is by and large ALWAYS built with a 3 phase electric motor. However a quantity of sites don't possess the 3 phase electric power supply. There is either a great price to have the power supply modifications or the company has to do without their ideal baler; and can't recycle efficiently.
In recent months, I have watched a specific Baler Machine Supplier closely, called Strong Recycling Balers Ltd. They are UK based and supply baler machinery Worldwide. Strong Recycling Balers ltd now solve all the problems above with a few very innovative techniques.
Both their smaller waste balers, such as V40i and V70i, are fitted standard with a 3 phase motor. Though there is a 415v 3 phase electric motor - the machines only uses a single phase 220/240v power supply. In addition, the V250 and V500 (Mill Size Baler) are of course fitted with 415v 3 phase electric motors, but it is possible to make use of either a 220/240v single phase or 415v 3phase on this machinery. It is your alternative at the order stage.
So whatever your requirements for a waste baler machine ranging from small to mill size, I would urge everybody to look on the Strong Recycling Balers internet site. This is because they will inevitably make use of superior motors in assembly and your electric power supply requirements can always be easily catered for. You can also call them directly on Tel +44 1384 567773.
