subject: How To Maintenance The Third Generation Sand Maker [print this page] How to maintenance the third generation sand maker
The third generation sand maker , absorb and digest advanced technology, combined with the relevant domestic industry specific working conditions and efficient system of sand making equipment. Efficient sand maker used for crushing medium hardness of solid materials, broken limestone, gypsum, clinker, mixed materials in the cement industry. Also crushed tricalcium phosphate, dolomite, perlite ore. Widely used in building materials, fertilizers, mining and refractories, and other industrial sectors.
The third generation sand maker maintenance considerations.
1. Sand maker maintenance is essential and must be sand maker a lot of downtime on a regular basis, and regularly observed sand maker internal wear, if worn shall promptly replace or repair. Also noted in the sand maker the normal course of observation can not be opened in order to avoid dangerous accidents.
2. Sand maker in the 400 hours of work, the appropriate amount of grease, until 2000 hours of work necessary to open the spindle commitment assembly cleaning, if the work 7200 hours, must be replaced with new bearings.
3. The size of the drive V-belt tension should be adjusted as appropriate to ensure that the triangular tape should be grouped match, and then each length as much as possible. Should be adjusted to the difference between the two motor current does not exceed 15A.
4. As the sand maker process, high-speed operation of equipment, should pay particular attention to safety. The staff should stay away from the device, you must turn off the power for more maintenance.
