subject: Making Clay Bricks [print this page] There are plenty of different ways to make your driveway look wonderful. You can pave it or you can cover it in gravel or you can use cobblestones. You can also just use concrete or leave it grass or even dirt if you really want to. It all depends on what you like and what your budget it. Something that is often utilized is paving pricks. These are frequently made from clay of some kind.
Making clay bricks is really a rather technical procedure that needs to be carried out correctly. If any of the steps are missed then your bricks do not set properly and also the paving won't last as long as it ought to as the bricks will disintegrate. If the bricks are baked for too long then the colour won't be uniform and the bricks will likely be too dry and will fall apart.
The first thing that needs to happen before any paving with clay bricks can be done is the clay for the bricks needs to be mixed. The proportions of the various ingredients needs to be correct for the brick to stand the test of time. If an excessive amount of sand is actually added the brick will be crumbly and if too much water is added the brick will not set properly.
The mix is then poured in to moulds that are the shape the manufacturer wants the actual bricks to be. There are some different shapes which can be used so the manufacturer needs to know more or less what kind of demand there is for the various choices and ensure that the correct bricks are made. Not having sufficient bricks of a certain shape could result in a loss of business whilst having way too many may cause an increase in storage costs which may be difficult to carry. For more information on driveway paving go to http://www.bosun.co.za.
Once the mixture has been poured it has to set. This is done by way of massive baking ovens where the bricks are placed on a conveyor belt and therefore are passed through the ovens. By the time the actual brick comes out the other end it's baked and solid. If the oven isn't warm enough the brick will not set all the way through and may have weak points. If the oven is simply too hot the paving bricks might crack in the heat due to the expansion that heat causes in most things.
As you can tell, there is lots that has to be done to make the paving bricks on your paved driveway that you may take for granted. It is essential to ensure that each portion of the procedure is carried out very carefully and fully so that the bricks are a high quality and will stand the test of time. Any deviation can cause a whole batch of bricks to be lost and costs a lot of cash. These types of mistakes are avoided where ever possible. The next time you look at your paved drive way remember how much effort went into making those bricks and be glad they were made correctly.
