subject: Tips About The Configuration Of Grinding Mill [print this page] The grinding mill is a kind of common used crushing equipment. According to the processing fineness, the grinding mill can be divided into the crusher and the mill, such as the jaw crusher and the Raymond mill.
Generally speaking, the configuration of the grinding mill has great effect on the benefits of users. Now Hongxing experts will give you some advice on the configuration of the grinding mill.
1. For the medium and small concentrator with few of grinding mill, it usually adopts the vertical configuration program. The main advantages of this program are easy to operate, convenient for the pulp distributing from the mainstream.
2. The cross length of the grinding mill should be suitable for selective cross length. If the selective cross length is too long, it is better to choose the parallel configuration.
3. For the multi-stage grinding mill, it can be configured in the same cross-room, also can be configured in a two-cross room. The advantages of a two-cross room configuration are that the process is simple, fewer return circuit. But the configuration with one cross room is more economical.
4. The angle for the belt conveyor which is used in the grinding mill should be less than 18. The feeding points of the feeder should keep stable.
5. The crane capacity is selected in accordance with the regulations. If the number of the grinding mill is large, it is necessary to use more cranes, avoiding using double layout method to reduce the plant height.
6. The dedicated maintenance equipment shall be selected according to the requirements of manufacturer. For the grinding mill with the diameter is greater than 5 meters, it should set up the dedicated robot, and the configuration should leave sufficient space and area.
If you want to get more information about the configuration of the grinding mill, please contact Hongxing Company or visit Hongxing Company directly.
