subject: How To Prolong The Service Life Of Cement Mixer [print this page] In general, the cement mixer is working 24 hours without stopping, which causes the serious attrition of the cement mixer. Therefore, the daily maintenance is particularly important for the cement mixer. Now Hongxing experts will introduce some practical methods to reduce the carbon deposition on the cement mixer engine, prolonging the service life of cement mixer.
1. Never running in an idle speed for a long time.
If the cement mixer runs in an idle speed for a long time, the time for the engine achieving a normal temperature will be extended. The evaporation speed for the fuel injected into the valve back will be slow, the carbon deposition will happen.
2. Master the cut-off time.
For the cement mixer equipped with a turbocharger, it can not be turned off immediately after a high-speed running or climbing. It is better to stop it after minutes of idling running. Because the carbon deposition speed of the cement mixer with a turbocharger is several times faster than that of the natural air breathing cement mixer.
3. Use the cleaning agent.
The impurities in the fuel is the main component of the carbon deposition, so in order to ensure the cleanliness of the fuel, we can use the practice of adding gasoline detergent in the fuel. This can effectively prevent the formation of carbon deposition on the metal surface, and activate the original carbon deposition particles, removing it gradually and slowly, thus protecting the engine from damage. However, the addition of detergents must be careful. Adding the shoddy products will get the opposite effect.
4. The regular maintenance
We recommend that the cement mixer should be cleaned regularly. That is to say, it is better to clean the inlet, valve, oil road and other parts which are easy to form carbon deposition of the cement mixer.
Henan Hongxing Mining Machinery Co., Ltd. is a professional cement mixer and cement mill manufacturer in China. Welcome to visit Hongxing Company.
