subject: Perhaps The Greatest Plastic Baler Manufacturer In The World! Which Electrical Power Source Is Best [print this page] I have been working in the Plastic Recycling Industry, for a number of years. I genuinely think myself to be rather conversant about the numerous Waste baler equipment Makes made around the world.
Among the foremost problems with small waste baler machinery, is the motor size. Usually, a small waste baler is driven with a 220/240v motor, in Europe and 110v motor, in USA. The throughput and torque of these small voltage motors is not so powerful. They mostly run at a very high temperature and it is a common problem for the capacitors (and even the motors) to burn out. The major factors for using a small 240v motor is because it is a little less costly and a large amount of small establishments don't have a 3 Phase Power Supply.
These small plastic baler machines can turn out cardboard bales ranging from 20kg to 80kg and plastic bales ranging from 40k to 150kg. They are appropriate for: small businesses, schools, colleges, manufacturers, hotels, restaurants, shops, transport companies etc. Most of these establishments are not blessed with a 3 Phase Power Supply. But if they were, then a 3 Phase motor on their recycling machine, would be much more efficient and reliable in the long-term.
A different predicament that often arises, is some big warehouses may call for a much larger waste baler appliance, but they also don't possess any 3 Phase Power Supply. They may necessitate a V250 or V500 Cardboard Baler, because their quantity of cardboard or plastic waste is much higher.
Several manufacturers do manufacture the V250 waste baler, with a 240v motor, but this may prove costly and unreliable in the long term. This is because the electric motor operates so hot and both the capacitor and motor can burn out and be pricey to mend.
The V500 Millsize Baler is usually ALWAYS constructed with a 3 phase motor. However several locations don't possess the 3 phase electric power supply. There is either a large cost to have the power supply modifications or the company has to do without their ideal baler; and can't recycle efficiently.
In recent times, I have watched a certain Cardboard Baler Equipment Supplier closely, known as Strong Recycling Balers Ltd. They are UK based and deliver cardboard baler machinery Worldwide. They now solve every one of the problems above with various very forward-thinking techniques.
Both their smaller waste balers, such as V40i and V70i, are fitted standard with a 3 phase motor. Even though there is a 415v 3 phase motor - the machinery only uses a single phase 220/240v electric power supply. Furthermore, the V250 and V500 (Mill Size Baler) are naturally fitted with 415v 3 phase electric motors, but it is possible to utilize either a 220/240v single phase or 415v 3phase on this machinery. It is your option at the order stage.
So whatever your requirements for a recycling machine ranging from small to mill size, I would encourage anyone to look on the Strong Recycling Balers site. This is because they will consequentially use better electric motors in construction and your electric power supply needs can always be easily catered for. You can also call them directly on Tel +44 1384 567773.
