subject: In All Probability The Top Cardboard Baler Machinery Suppliers In The World! Which Electrical Power [print this page] I have been working in the Cardboard Recycling Business, for a number of years. I genuinely deem myself to be rather well-informed about the numerous Recycling baler equipment Designs built around the world.
Considered one of the key problems with small recycling balers, is the motor size. Mostly, a small recycling machine is powered with a 220/240v motor, in Europe and 110v motor, in USA. The throughput and torque of these small voltage motors is not so powerful. They usually run at a very high temperature and it is a common problem for the capacitors (and even the motors) to burn out. The key motives for using a small 240v motor is because it is slightly less expensive and a large amount of small establishments don't have a 3 Phase Power Supply.
These small recycling baler machines can create cardboard bales ranging from 20kg to 80kg and plastic bales ranging from 40k to 150kg. They are suitable for: small businesses, schools, colleges, manufacturers, hotels, restaurants, shops, transport companies etc. The largest part of these establishments are not blessed with a 3 Phase Power Supply. But if they were, then a 3 Phase motor on their recycling baler equipment, would be much more efficient and reliable in the long-term.
An additional catch that often arises, is some large warehouses may require a much larger plastic baler appliance, but they also don't have any 3 Phase Power Supply. They may require a V250 or V500 Cardboard Baler, because their amount of cardboard or plastic waste is much higher.
Certain manufacturers do manufacture the V250 waste baler, using a 240v motor, but this can prove costly and inefficient in the long term. This is because the motor works so hot and both the capacitor and electric motor can burn out and be costly to mend.
The V500 Waste Baler Machine is in the main ALWAYS manufactured with a 3 phase electric motor. But a quantity of locations don't possess the 3 phase power supply. There is either a great cost to have the power supply modifications or the company has to do without their ideal baler; and can't recycle effectively.
In recent times, I have worked with a particular Recycling Machine Supplier closely, known as Strong Recycling Balers Ltd. They are UK based and provide recycling baler equipment Worldwide. Strong Recycling Balers ltd now solve all the problems above with various very forward-thinking techniques.
Both their smaller waste balers, such as V40i and V70i, are fitted standard with a 3 phase motor. Though there is a 415v 3 phase electric motor - the equipment only uses a single phase 220/240v electric power supply. In addition, the V250 and V500 (Mill Size Baler) are not surprisingly fitted with 415v 3 phase electric motors, but it is possible to make use of either a 220/240v single phase or 415v 3phase on this machinery. It is your option at the order stage.
So no matter what your requirements for a waste baler machine ranging from small to mill size, I would encourage everybody to look on the Strong Recycling Balers web site. This is because they will without doubt apply better motors in assembly and your power supply requirements can always be easily catered for. You can also call them directly on Tel +44 1384 567773.
