subject: Information And Advice On Lessons On Driving A Standard [print this page] Manual gear-box car differs on how you can drive an automatic gear-box car. In a standard-shift car, the increase in speed of the car will depend on the manual shifting that you do, hence, automatic transmission will shifts the gears for you. Learning how to drive a standard-shift car may not be easy compared to automatic-shift car and you may find it frustrating somehow. Here are some useful information and advice to lessen the thought of burden during the process.
Some Standard Driving Instructions
To help with you on your first driving standard instructions, you could ask a friend who you think can help you learn how to drive the vehicle. Make sure that this friend of yours has the patience and willingness to teach you and of course that you two are comfortable to work with each other. Prefer to choose to a place where there is no vehicles close by and you have the enough space to maneuver and routing the car. You may choose a free parking lot to where you can enjoy practicing the control of the car.
You should be familiarized with the three pedals that a standard car has. From left to right, it is the clutch pedal - this transmits the motion in a car, you may engaged (allows the car to move forward while you press it down) and disengaged (allows the car to drift in a neutral state); the brake pedal and the gas pedal. You can repeat this pattern: with the emergency brake on, by pushing in the clutch with your left foot and by moving the gear shift into the second gear while slowly releasing the clutch. This tip will help you to be familiar with the action and you can adjust to your comfortable seating position in while driving.
You may break up the gears a little but do not yourself be down to it and bear in mind that no matter the car sways, you will not let the car be hurt during the lesson.
Getting on Track
Let your foot feel the tapping of the gas pedal with your right foot while letting off (engaging) the clutch using your left foot. The first gear is the hardest part in driving a standard-car. Tap harder on the gas pedal whenever you hear the engine begins to drag. Don't worry if you pauses the car for several times for the fear of taking off too fast, it doesn't harm the car anyway.
When to Do the Shift
Listen to the engine once your car is progressing in first gear. If the car's RPM's or revolutions per minute increase a few thousand and you heard the engine not in the normal sound, it means that the engine is strained and that's the time to shift. Disengage the clutch then shift to second gear then reengage the clutch.
Caution
If you are driving on hill, engaging the clutch and starting in first - for you to keep you car from rolling backwards into another car behind you. There is much footwork in driving on hills compared from driving on flat surface.
