subject: Almost Certainly The Top Cardboard Baler Machinery Providers In The World! What Electrical Power Sou [print this page] I have been working in the Waste Recycling Business, for a number of years. I truly deem myself to be quite knowledgeable about the numerous Millsize baler Makes built around the world.
Among the major problems with small cardboard baler machinery, is the electric motor size. Ordinarily, a small recycling machine is powered with a 220/240v motor, in Europe and 110v motor, in USA. The throughput and torque of these small voltage motors is not so powerful. They typically run at a very high temperature and it is a common problem for the capacitors (and even the motors) to burn out. The chief factors for using a small 240v motor is because it is a little cheaper and nearly all of small establishments don't have a 3 Phase Power Supply.
These small cardboard baler machines can make cardboard bales ranging from 20kg to 80kg and plastic bales ranging from 40k to 150kg. They are appropriate for: small businesses, schools, colleges, manufacturers, hotels, restaurants, shops, transport companies etc. A large amount of these establishments are not blessed with a 3 Phase Power Supply. But if they were, then a 3 Phase motor on their waste balers, would be much more efficient and dependable in the long-term.
Another obstacle that often arises, is certain sizeable warehouses may need a much larger waste baler appliance, but they also don't have any 3 Phase Power Supply. They may require a V250 or V500 Waste Baler, because their capacity of cardboard or plastic waste is much higher.
Several manufacturers do construct the V250 waste baler, using a 240v motor, but this may prove expensive and unreliable in the long term. This is because the motor works so hot and both the capacitor and motor can burn out and be dear to mend.
The V500 Cardboard Baler is in general ALWAYS manufactured with a 3 phase electric motor. Although a number of sites don't have the 3 phase electric power supply. There is either a big expense to have the power supply modifications or the company has to do without their ideal baler; and can't recycle effectively.
In recent times, I have monitored a particular Waste Baler Provider closely, called Strong Recycling Balers Ltd. They are UK based and supply recycling balers Worldwide. They now resolve all the problems above with several very innovative techniques.
Both their smaller waste balers, such as V40i and V70i, are fitted standard with a 3 phase motor. Even though there is a 415v 3 phase motor - the machines only uses a single phase 220/240v electric power supply. In addition, the V250 and V500 (Mill Size Baler) are not surprisingly fitted with 415v 3 phase electric motors, but it is possible to utilize either a 220/240v single phase or 415v 3phase on this machinery. It is your option at the order stage.
So no matter what your requirements for a waste baler ranging from small to mill size, I would urge everyone to browse on the Strong Recycling Balers internet site. This is because they will consequentially use better motors in assembly and your power supply wants can always be easily catered for. You can also call them directly on Tel +44 1384 567773.
