subject: Possibly The Best Plastic Baler Machinery Manufacturer In The World! Which Electrical Power Source I [print this page] I have been working in the Cardboard Recycling Business, for a number of time. I truly think myself to be very familiar about the numerous Cardboard baler machinery Makes provided around the world.
One among the foremost problems with small recycling balers, is the motor size. Ordinarily, a small recycling machine is powered with a 220/240v motor, in Europe and 110v motor, in USA. The throughput and torque of these small voltage motors is not so powerful. They mostly run at a very high temperature and it is a common problem for the capacitors (and even the motors) to burn out. The major factors for using a small 240v motor is because it is somewhat less costly and most of small establishments don't have a 3 Phase Power Supply.
These small cardboard balers can turn out cardboard bales ranging from 20kg to 80kg and plastic bales ranging from 40k to 150kg. They are appropriate for: small businesses, schools, colleges, manufacturers, hotels, restaurants, shops, transport companies etc. Nearly all of these establishments are not blessed with a 3 Phase Power Supply. But if they were, then a 3 Phase motor on their plastic baler, would be much more efficient and dependable in the long-term.
Another problem which often occurs, is certain big warehouses will have need of a much bigger cardboard baler machine, but they also don't possess any 3 Phase Power Supply. They may want a V250 or V500 Cardboard Baler, because their quantity of cardboard or plastic waste is much higher.
A quantity of manufacturers do manufacture the V250 waste baler, using a 240v motor, but this may prove costly and inefficient in the long term. This is because the motor runs so hot and both the capacitor and motor can burn out and be dear to mend.
The V500 Mill Size Baler is usually ALWAYS manufactured with a 3 phase motor. However many locations don't possess the 3 phase power supply. There is either a big cost to have the power supply modifications or the company has to do without their ideal baler; and can't recycle efficiently.
In recent times, I have watched a specific Recycling Baler Machine Supplier closely, called Strong Recycling Balers Ltd. They are UK based and supply plastic baler machinery Worldwide. They now resolve all the problems discussed with particular very innovative methods.
Both their smaller waste balers, e.g. V40i and V70i, are fitted standard with a 3 phase motor. Even though there is a 415v 3 phase electric motor - the machines only needs a single phase 220/240v electric power supply. Furthermore, the V250 and V500 (Mill Size Baler) are of course fitted with 415v 3 phase motors, but it is possible to apply either a 220/240v single phase or 415v 3phase on this machine. It is your alternative at the order stage.
So no matter what your needs for a recycling machine ranging from small to mill size, I would urge anyone to look on the Strong Recycling Balers website. This is because they will automatically make use of superior motors in construction and your electric power supply requirements can always be easily catered for. You can also call them directly on Tel +44 1384 567773.
