subject: Almost Certainly The Finest Baler Supplier In The World! Which Electrical Power Supply Is Ideal For [print this page] I have been working in the Cardboard Recycling Industry, for a number of years. I really believe myself to be fairly familiar about the diverse Baler machinery Designs built around the world.
Considered one of the key problems with small cardboard balers, is the motor size. Typically, a small recycling machine is powered with a 220/240v motor, in Europe and 110v motor, in USA. The throughput and torque of these small voltage motors is not so powerful. They usually operate at a very high temperature and it is a common problem for the capacitors (and also the motors) to burn out. The core factors for using a small 240v motor is because it is slightly less costly and a good number of small establishments don't have a 3 Phase Power Supply.
These small recycling baler machines can make cardboard bales ranging from 20kg to 80kg and plastic bales ranging from 40k to 150kg. They are appropriate for: small businesses, schools, colleges, manufacturers, hotels, restaurants, shops, transport companies etc. A large amount of these establishments are not blessed with a 3 Phase Power Supply. But if they were, then a 3 Phase motor on their waste balers, would be much more efficient and dependable in the long term.
Another obstacle which often occurs, is some sizeable warehouses may require a much larger baler machine, but they also don't possess any 3 Phase Power Supply. They may want a V250 or V500 Cardboard Baler, because their capacity of cardboard or plastic waste is much higher.
A few manufacturers do make the V250 waste baler, using a 240v motor, but this may prove costly and inefficient in the long term. This is because the motor operates so hot and both the capacitor and motor can burn out and be expensive to mend.
The V500 Waste Baler is by and large ALWAYS constructed with a 3 phase motor. Although several locations don't possess the 3 phase power supply. There is either a great cost to have the power supply modifications or the company has to do without their ideal baler; and can't recycle efficiently.
In recent months, I have watched a particular Cardboard Baler Machine Manufacturer closely, named Strong Recycling Balers Ltd. They are UK based and deliver recycling baler machinery Worldwide. They now resolve all the problems discussed with some very advanced methods.
Both their smaller waste balers, such as V40i and V70i, are fitted standard with a 3 phase motor. Even though there is a 415v 3 phase electric motor - the machinery only uses a single phase 220/240v electric power supply. In addition, the V250 and V500 (Mill Size Baler) are not surprisingly fitted with 415v 3 phase motors, but it is possible to use either a 220/240v single phase or 415v 3phase on this machine. It is your selection at the order stage.
So whatever your requirements for a waste baler ranging from small to mill size, I would encourage everyone to look on the Strong Recycling Balers site. This is because they will automatically utilize better electric motors in construction and your electric power supply wants can always be easily catered for. You can also call them directly on Tel +44 1384 567773.
